Changing The Paper Size In Paper Tray 1 - Tray 2 - Sharp MX-M550 Operation Manual

3 Gently push tray 1-tray 2 into the machine.

Changing the paper size in paper tray 1 - tray 2

To change the paper size of tray 1 - tray 2, follow the steps below.
This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading
paper, see "Loading paper in paper tray 1 - tray 2" (page 2-2).
Remove the paper size guide.
1
Hook
With the base of the tray pressed all the way down,
hold down the hook at the bottom on the paper
size guide and pull the paper size guide up slightly.
NOTES
● Do not place heavy objects on the tray or press
down on the tray.
● Before changing the paper size of tray 1, raise the
paper guide.
Push the tray firmly all
the way into the
machine.
Tray 1 Tray 2
Paper guide
4 Set the paper type.
If the paper size was changed from an inch size to an
AB size, or from an AB size to an inch size, or if the
paper type was changed, be sure to change the
appropriate settings as explained in "Setting the
paper type and paper size" (See page 2-14).
5 Loading paper in paper tray 1/tray 2 is now
complete.
Adjust the paper size guide to the paper
2
size to be used.
(A)
LT
A4
Paper sizes are inscribed at the slot (A) on the
bottom of the tray and at the hole (B) at the top of
the paper size guide. ("LT" indicates 8-1/2" x 11"
size.)
Align the bottom of the paper size guide with the
slot, and align the hole at the top with the locking
tab.
NOTES
● When attaching the paper size guide, make sure
that the top and bottom of the guide are aligned to
the same paper size.
● If the top and bottom of the paper size guide are not
aligned to the same paper size, skewed feeding
and misfeeds will result.
LOADING PAPER
2
(B)
A4
LT
2-3