Specifications - Sharp IG-A40UW Operation Manual

SPECIFICATIONS

Model
Power supply
Fan Speed Adjustment
Power consumption (W)
Operating noise level (dBA)
Airfl ow volume CFM (m
Applicable fl oor surface area *
Ion density (ions/cm
Power cord
Outer dimensions
Weight
*1 The target fl oor surface area for which an emitted airborne ion density of about 25,000
ions/cm can be measured at a point near the center of the room (at a height of about 1.2m
3
from the fl oor), during operation at the HIGH mode when the main unit is placed near a
wall.
*2 Ion count per cm
1.2m from the floor) during operation at each airstream setting when the main unit is
placed near the wall.
•
The number of ions will vary according to the room conditions and operation mode.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall
outlet, this product consumes about 0.3W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
/min)
3
1
) *
2
3
blown into air at around the center of the room ( at a height of approx.
3
IG-A40U
120V 60Hz
HIGH MED.
37
47
494(14) 381(10.8)
538 sq ft (50m
25,000
12,000
8.3ft (2.5m)
37in(W) 9-1/8in(D) 19in(H)
940mm(W) 230mm(D) 480mm(H)
33.1lbs (15.0kg)
E-14
LOW
10
19
40
34
300(8.5)
2
)
7,000