Ignition Switch - Honda CR-V 2008 Manual

Main Menu
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
LOCK (0) You can insert or
−
remove the key only in this position.
To turn the key, the shift lever must
be in Park, and you must push the
key in slightly.
Table Of Contents
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
ACCESSORY (I)
operate the audio system and the
accessory power sockets in this
position.
ON (II)
−
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
START (III)
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
WWW.PlanDeGraissage.ORG
You can
−
This is the normal key
Use this position
−

Ignition Switch

You will hear a reminder beeper if
you leave the key in the LOCK (0) or
the ACCESSORY (I) position and
open the driver's door. Remove the
key to turn off the beeper.
The shift lever must be in Park
before you can remove the key from
the ignition switch.
81