Electrolux EW6F4805AR User Manual page 25

3. Touch the Départ/Pause
again.
The washing programme continues.
To start the programme again make sure
that the programme dial is correctly
positioned on the interrupted programme
and the indicator of the Départ/Pause
button is flashing.
12.10 Cancelling a running
programme
1. Press the button Marche/Arrêt to cancel
the programme and to deactivate the
appliance.
2. Press the button Marche/Arrêt again to
activate the appliance.
If the SensiCare System has completed
and the water filling has already started,
the new programme starts without
repeating the SensiCare System. The
water and the detergent are not drained
out in order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20 minutes
after the starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
12.11 Opening the door - Adding
garments
If the temperature and level of the water
in the drum are too high and/or the drum
is still rotating you should not open the
door.
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator
button 1. Touch the Départ/Pause
2. Wait until the door lock indicator
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Départ/Pause
goes off.
The door unlocks and the indicator
off.
1. Press button Marche/Arrêt to deactivate
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display shows the end of the previous
programme. Turn the programme dial to
set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
.
indicator starts flashing.
stops flashing and goes off. Open the
appliance door. If necessary, add or
remove the items. Close the door and
touch the Départ/Pause
programme or the delay start continues.
the appliance.
dispenser slightly ajar to prevent mildew
and odours.
button. The
button. The
button
goes
ENGLISH 25