1. Manuals
  2. Brands
  3. Philips Manuals
  4. Single board computers
  5. F815C Series
  6. Installation manual

Philips F815C Series Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
F815C
Series
(Full-Size Single Board Computer)
I
G
NSTALLATION
UIDE
Installation Guide Revision A.2
6007002815CA2

Advertisement

Table of Contents
loading

Summary of Contents for Philips F815C Series

  • Page 1 All manuals and user guides at all-guides.com F815C Series (Full-Size Single Board Computer) NSTALLATION UIDE Installation Guide Revision A.2 6007002815CA2...
  • Page 2 All manuals and user guides at all-guides.com...
  • Page 3 All manuals and user guides at all-guides.com © COPYRIGHT All rights reserved. The information contained in this guide has been validated and reviewed for accuracy. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this guide, the Manufacturer assumes no responsibility for errors or omissions.

  • Page 4: Table Of Contents

    ONTENTS ECTION NTRODUCTION Unpacking F815C Series Description Features 1.3.1 Hardware Monitoring 1.3.2 I/O Shield Connector 1.3.3 F815C Series Overview 1.3.4 System Block Diagram Specifications ECTION NSTALLATIONS System Installation 2.1.1 CPU Installation 2.1.2 Memory Module Installation 2.1.3 Setting Jumper and DIP Switches...
  • Page 5 All manuals and user guides at all-guides.com ONTENTS BIOS S ECTION WARD ETUP BIOS Instructions Main Menu Standard CMOS Features IDE Adapters Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations 3.10 PC Health Status 3.11 Frequency/Voltage Control 3.12 Load Fail-Safe Default 3.13 Load Optimized Defaults 3.14 Supervisor/User Password Setting...
  • Page 6 All manuals and user guides at all-guides.com...

  • Page 7: Section 1 Introduction

    All manuals and user guides at all-guides.com ECTION NTRODUCTION Unpacking F815C Series 1. Take out the F815C series unit from the carton box, check if the unit is properly secure in the plastic bag. 2. Check the contents of the carton box: Single Board Computer...
  • Page 8 All manuals and user guides at all-guides.com Introduction Print & COM1 ribbon cable Printer ribbon cable (F815C/LN Series) (F815C/LE Series) K/B & M/S Y type cable Driver CD K/B-M/S extend to BP cable ATX power control cable (6-pins to 6-pins) (4-pins to 4-pins) 3.

  • Page 9: Description

    All manuals and user guides at all-guides.com Introduction Description The F815C Series all-in-one single board computer is optimized for socket 370 FC-PGA processor, supporting 100MHz and 133 MHz Front Side Bus, the memory can accommodate is up to 512 MB SDRAM. This board is ®...

  • Page 10: Hardware Monitoring

    The SBC is equipped with an I/O bracket. Please use the appropriate I/O shield (figure 1). F815C/LE Series LAN1 COM1 F815C/LN Series LAN2 / LAN1 Figure 1: I/O bracket layout 1.3.3 F815C Series Overview Function / Model F815C/LE F815C/LN Chipset 815EP 815EP SCSI Function LCD Function...

  • Page 11: System Block Diagram

    All manuals and user guides at all-guides.com Introduction 1.3.4 System Block Diagram Socket 370 Processor 66/100/133MHz 3 DIMM Modules 66/100/133MHz C&T 544 BGA Graphic PICMG Bus BIOS PCI Bus Intel Ethernet USB Ports ICH2 CD ROM 241 BGA PCI-ISA Bridge Super I/O ISA Bus Serial Ports...

  • Page 12: Specifications

    All manuals and user guides at all-guides.com Introduction Specifications F815C Series: Processor: ® ® - Socket 370 Processor, for Intel Celeron / Pentium ( Coppermine™ / Tualatin™ ) Processor Chipset: ® - Intel 815EP AGPset Front Side Bus: - 66/100/133 MHz...
  • Page 13 All manuals and user guides at all-guides.com Introduction I/O Connector: - 9-pins D-Sub COM1 connector (F815C/LE Series) - RJ-45 connector (F815C/LE Series use two RJ-45 Connector) - 15-pins D-Sub VGA connector - PS/2 Mouse and PS/2 style Keyboard USB Ports: - 4 x USB ports (pin-header) BIOS: - Award Plug &...

  • Page 14: Section 2 Installations

    All manuals and user guides at all-guides.com ECTION NSTALLATIONS System Installation 2.1.1 CPU Installation Carefully follow the steps below in order to install the CPU: 1. Check and confirm that the jumpers are correctly set for the CPU you are going to install (figure 3). 2.

  • Page 15: Memory Module Installation

    All manuals and user guides at all-guides.com Installations Removing a CPU: 1. Before removing the CPU, turn off the F815C Series power; then wait for about 20 minutes until the heat radiation plate of the cooling fan and the CPU cool down.
  • Page 16 2. Do not touch the connector of the DIMM. Dirt residue may cause a malfunction. 3. Hold the DIMM with its notch to the front side of the F815C Series and insert it completely into the socket. A DIMM should be inserted into the inner socket first.

  • Page 17: Setting Jumper And Dip Switches

    All manuals and user guides at all-guides.com Installations 2.1.3 Setting Jumpers and DIP Switches There are jumpers and DIP-switches on the system board of the F815C Series. You can set the jumpers to make the necessary operations. Figure 6: Jumper Connector For any three-pins jumpers (figure 6), the jumper setting is 1-2 when the jumper connects pin 1 and 2.

  • Page 18: Board Layout

    All manuals and user guides at all-guides.com Installations Board Layout Jumper & Connector Location COM2 CN23 CN20 CN21 CN22 CN19 CN12 CN11 IDE1 IDE2 CN17 CN14 BAT1 CN18 CN1 CN5 CN9 CN15 DIM1 DIM2 DIM3 CN13 CN16 ATX Ctrl. Front Panel Chassis Fan F815C REV1.0...

  • Page 19: Jumper Setting

    All manuals and user guides at all-guides.com Installations Jumper Setting Table for Jumper Location Description: Use the information in the following table to change the jumpers and the DIP switches. Jumpers Functions Clear CMOS Setting Select COM Port Setting Select Panel Type Select Watchdog Timer Setting Select...
  • Page 20 All manuals and user guides at all-guides.com Installations In order to set up the correct configuration, here is the description about how to set the jumpers to enable/disable or change functions. All jumpers’ location please refer to jumper location diagram. Clear CMOS Setting Select: JP1 Function Normal (Default)
  • Page 21 All manuals and user guides at all-guides.com Installations Panel Type Select: JP3 Reserve (User Define) Default 1-2, 3-4 On, 5-6, 7-8 Off Location: Watchdog Timer Setting Select: JP4 Function Reset System (Default) Location:...

  • Page 22: Connector's Description

    All manuals and user guides at all-guides.com Installations Connector’s Description Connector Location COM2 CN23 CN20 CN21 CN22 CN19 CN12 CN11 IDE1 IDE2 CN17 CN14 BAT1 CN18 CN1 CN5 CN9 CN15 DIM1 DIM2 DIM3 CN13 CN16 ATX Ctrl. Front Panel Chassis Fan F815C REV1.0...
  • Page 23 All manuals and user guides at all-guides.com Installations Table for Connector’s Location Description: Use the information in the following table to change the connector. Connectors Functions Primary IDE Connector Floppy Disk Connector Power Fan Connector Secondary IDE Connector Parallel Port Connector COM2 RS-232/422/485 Serial Port Connector CN11 USB0/USB1 Port Connector...
  • Page 24 All manuals and user guides at all-guides.com Installations Primary IDE Connector (40-pins 2.54mm Pitch Pin-Header with Housing): CN2 Pin # Assignment Pin # Assignment Reset IDE Ground Host Data 7 Host Data 8 Host Data 6 Host Data 9 Host Data 5 Host Data 10 Host Data 4 Host Data 11...
  • Page 25 All manuals and user guides at all-guides.com Installations Floppy Disk Connector (34-pins 2.54mm Pitch Pin-Header with Housing): CN3 Pin # Assignment Pin # Assignment Ground Drive Density Selection Ground No Connect Ground Drive Density Selection Ground Index Ground Motor Enable 0 Ground Drive Select 1 Ground...
  • Page 26 All manuals and user guides at all-guides.com Installations Secondary IDE Connector (40-pins 2.54mm Pitch Pin-Header with Housing): CN6 Pin # Assignment Pin # Assignment Reset IDE Ground Host Data 7 Host Data 8 Host Data 6 Host Data 9 Host Data 5 Host Data 10 Host Data 4 Host Data 11...
  • Page 27 All manuals and user guides at all-guides.com Installations Parallel Port Connector (26-pins 2.54mm Pitch Pin-Header with Housing): CN7 Pin # Assignment Pin # Assignment Line Printer Strobe PD 0, Parallel Data 0 PD 1, Parallel Data 1 PD 2, Parallel Data 2 PD 3, Parallel Data 3 PD 4, Parallel Data 4 PD 5, Parallel Data 5...
  • Page 28 All manuals and user guides at all-guides.com Installations USB0/USB1 Port Connector (10-pins Pin-Header): CN11 Pin # Assignment Pin # Assignment Ground USB1 0- Ground USB1 0+ USB2 0+ Ground USB2 0- Ground Figure: USB2/USB3 Port Connector (10-pins Pin-Header): CN12 Pin # Assignment Pin # Assignment...
  • Page 29 All manuals and user guides at all-guides.com Installations System Panel Indicate Connector: CN13 Pin # Assignment Pin # Assignment RESET RESET+ FIRTX RESET- SPEAKER IRRX Ground SPKR (Default) IRTX BUZZ (Default) HDD LED Ground HDLED+ PWR LED HDLED- PWR ON PWLED+ PWRBT+ PWRBT-...
  • Page 30 All manuals and user guides at all-guides.com Installations TFT Panel Connector (40-pins Male): CN14 Pin # Assignment Pin # Assignment Ground PVCC Ground PVCC Ground PVCC SHFCLK ENAVEE PVEE ENAVDD P12V ENABKL P12V Figure: Chassis Fan Power Connector: CN15 Pin # Assignment Ground +12V...
  • Page 31 All manuals and user guides at all-guides.com Installations ATX Power Connector: CN16 Pin # Assignment 5VSB PSON Ground Figure: CPU Fan Power Connector: CN18 Pin # Assignment Ground +12V Fan Status Signal Figure:...
  • Page 32 All manuals and user guides at all-guides.com Installations External Keyboard Connector (6-pins): CN19 Pin # Assignment Pin # Assignment Mouse Clock Mouse Data Keyboard Clock Keyboard Data Ground Figure: PS/2 Keyboard/Mouse Connector (Mini Din 6 Pins): CN20 Pin # Assignment Pin # Assignment Keyboard Data...
  • Page 33 All manuals and user guides at all-guides.com Installations COM1 RS-232 Serial Port Connector (D-SUB 9-pins Male): CN21 (F815C/LE Series) Pin # Assignment Pin # Assignment DCD (Data Carrier Detect) RXD (Receive Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request to Send) CTS (Clear to Send)
  • Page 34 All manuals and user guides at all-guides.com Installations LAN1 & LAN2 Connector (RJ-45 Phone-jacket): CN22 Pin # Assignment Pin # Assignment Transmit output (+) Transmit output (-) Receive input (-) Receive input (+) Figure: LAN1 (82559) F815C/LE Series LAN2 LAN1 (82559) (82562) F815C/LN Series...

  • Page 35: Section 3 Award Bios Setup

    All manuals and user guides at all-guides.com ECTION BIOS S WARD ETUP 3.1 BIOS Instructions Award’s ROM BIOS provides a built-in Setup program, which allows user to modify the basic system configuration and hardware parameters. modified data will be stored in a battery-backed CMOS, so that data will be retained even when the power is turned off.

  • Page 36: Main Menu

    All manuals and user guides at all-guides.com Award BIOS Setup 3.2 Main Menu Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter>...
  • Page 37 All manuals and user guides at all-guides.com Award BIOS Setup Integrated Peripherals: Use this menu to specify your settings for integrated peripherals. See section 4 for the details. Power Management Setup: Use this menu to specify your settings for power management. See section 5 for the details.

  • Page 38: Standard Cmos Features

    All manuals and user guides at all-guides.com Award BIOS Setup 3.3 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
  • Page 39 All manuals and user guides at all-guides.com Award BIOS Setup IDE Secondary Master: Options are in its sub menu (described in Table 3) Press <Enter> to enter the sub menu of detailed options. IDE Secondary Master: Options are in its sub menu (described in Table 3) Press <Enter>...

  • Page 40: Ide Adapters

    All manuals and user guides at all-guides.com Award BIOS Setup 3.4 IDE Adapters The IDE adapters control the hard disk drive. Use a separate sub menu to configure each hard disk drive. CMOS Setup Utility – Copyright © 1984 - 2001 Award Software IDE Primary Master IDE HDD Auto-Detection Press Enter...
  • Page 41 All manuals and user guides at all-guides.com Award BIOS Setup The following options are selectable only if the ‘IDE Primary Master’ item is set to ‘Manual’ Cylinder: Options Min = 0, Max = 65535 Set the number of cylinders for this hard disk. Head: Options Min = 0, Max = 255 Set the number of read/write heads Precomp: Options Min = 0, Max = 65535...

  • Page 42: Advanced Bios Features

    All manuals and user guides at all-guides.com Award BIOS Setup 3.5 Advanced BIOS Features This section allows you to configure your system for basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. CMOS Setup Utility –...
  • Page 43 All manuals and user guides at all-guides.com Award BIOS Setup CPU Internal Cache/External Cache: These two categories speed up memory access. However, it depends on CPU/chipset design. Enabled---Enable cache Disabled---Disable cache CPU L2 Cache ECC Checking: This item allows you to enable/disable CPU L2 Cache ECC checking. The choice: Enabled, Disabled.
  • Page 44 All manuals and user guides at all-guides.com Award BIOS Setup Typematic Rate Setting: Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected. The choice: Enabled, Disabled. Typematic Rate (Chars/Sec): Sets the number of times a second to repeat a keystroke when you hold the key down.
  • Page 45 All manuals and user guides at all-guides.com Award BIOS Setup Report No FDD For Win 95: Whether report no FDD for Win 95 or not. The choice: Yes, No. Small Logo (EPA) Show: Set the Logo (EPA) show or not. The choice: Enabled, Disabled.

  • Page 46: Advanced Chipset Features

    All manuals and user guides at all-guides.com Award BIOS Setup 3.6 Advanced Chipset Features This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and access to system memory resources, such as DRAM and the external cache.
  • Page 47 All manuals and user guides at all-guides.com Award BIOS Setup SDRAM RAS-to-CAS Delay: You can select RAS to CAS Delay time in HCLKs of 2/2 or 3/3. The system board designer should set the values in this field, depending on the DRAM installed.
  • Page 48 All manuals and user guides at all-guides.com Award BIOS Setup CPU Latency Timer: When enabled this item, the CPU cycle will only be deferred after it has been held in a “Snoop Stall” for 31 clocks and another ADS# has arrived. When disabled, the CPU cycle will be deferred immediately after the GMCH receives another ADS#.

  • Page 49: Integrated Peripherals

    All manuals and user guides at all-guides.com Award BIOS Setup 3.7 Integrated Peripherals CMOS Setup Utility – Copyright © 1984 – 2001 Award Software Integrated Peripherals OnChip IDE Device Press Enter Item Help On-Chip Primary PCI IDE Enabled ____________________________ On-Chip Secondary PCI IDE Enabled IDE Primary Master PIO Auto...
  • Page 50 All manuals and user guides at all-guides.com Award BIOS Setup IDE Primary/Secondary Master/Slave UDMA: Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/33, select “Auto”...

  • Page 51: Power Management Setup

    All manuals and user guides at all-guides.com Award BIOS Setup 3.8 Power Management Setup The Power Management Setup allows you to configure you system to most effectively save energy while operating in a manner consistent with your own style of computer use. CMOS Setup Utility –...
  • Page 52 All manuals and user guides at all-guides.com Award BIOS Setup 1. HDD Power Down 2. Doze Mode 3. Suspend Mode Min. Power Saving: Minimum power management. Doze Mode = 1 hr. Standby Mode = 1 hr., Suspend Mode = 1 hr., and HDD Power Down = 15 min. Max.
  • Page 53 All manuals and user guides at all-guides.com Award BIOS Setup MODEM Use IRQ: This determines the IRQ in which the MODEM can use. The choice: 3, 4, 5, 7, 9, 10, 11 and NA. Suspend Mode: When “Enabled” and after the set time of system inactivity. All devices except the CPU will be shut off.
  • Page 54 All manuals and user guides at all-guides.com Award BIOS Setup PM Events: PM events are I/O events whose occurrence can prevent the system from entering a power saving mode or can awaken the system from such a mode. In effect, the system remains alert for anything, which occurs to a device, which is configured as Enabled, even when the system is in a power down mode.

  • Page 55: Pnp/Pci Configurations

    All manuals and user guides at all-guides.com Award BIOS Setup 3.9 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system, which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.
  • Page 56 All manuals and user guides at all-guides.com Award BIOS Setup Resource controlled by: The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug and Play ®...

  • Page 57: Pc Health Status

    All manuals and user guides at all-guides.com Award BIOS Setup 3.10 PC Health Status CMOS Setup Utility – Copyright © 1984 - 2001 Award Software PC Health Status CPU Warning Temperature Disabled Item Help Current System Temp. 34°C/93°F ____________________________ Current CPU Temp. 40°C/104°F Current Chassis Fan Speed 5010RPM...
  • Page 58 All manuals and user guides at all-guides.com Award BIOS Setup +5V/+12V/-12V/-5V: Show you the voltage of +5V/+12V/-12V/-5V. Shutdown Temperature: This item allows you to set up the CPU shutdown Temperature. This item is ® only effective under Windows 98 ACPI mode. The choice: Disabled, 60°C / 140°F, 65°C / 149°F, 70°C / 159°F and 75°C / 167°F.

  • Page 59: Frequency/Voltage Control

    All manuals and user guides at all-guides.com Award BIOS Setup 3.11 Frequency/Voltage Control CMOS Setup Utility – Copyright © 1984 - 2001 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI CLK Disabled Item Help Spread Spectrum Modulated Disabled ____________________________ X Linear Spread Model X Linear Spread Rage Menu Level CPU Skew Adjust...
  • Page 60 All manuals and user guides at all-guides.com Award BIOS Setup CPU Clock Ratio: This item allows you to set up the CPU clock ratio, but this function depends on different CPU performance. It is only effective for those clock ratio haven’t been locked.

  • Page 61: Load Fail-Safe Default

    All manuals and user guides at all-guides.com Award BIOS Setup 3.12 Load Fail-Safe Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N)? N Pressing “Y” loads the BIOS default values for the most stable, minimal-performance system operations.

  • Page 62: Load Optimized Defaults

    All manuals and user guides at all-guides.com Award BIOS Setup 3.13 Load Optimized Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)? N Pressing “Y” loads the default values that are factory settings for optimal performance system operations.

  • Page 63: Supervisor/User Password Setting

    All manuals and user guides at all-guides.com Award BIOS Setup 3.14 Supervisor/User Password Setting You can set either supervisor or user password, or both of then. The differences between are: Set Supervisor Password: can enter and change the options of the setup menus.

  • Page 64: Exit Selecting

    All manuals and user guides at all-guides.com Award BIOS Setup 3.15 Exit Selecting Save & Exit Setup Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your system off.

  • Page 65: Appendix

    All manuals and user guides at all-guides.com PPENDIX PPENDIX ® A.1 Intel Processor Support List ® ® Below is a list of Intel Celeron™ / Pentium !!! ( Coppermine™ / Tualatin™ process) processor that has been tested with product. This list will continue to be updated as additional processors are tested.

This manual is also suitable for:

F815c/leF815c/ln

Table of Contents