Error Indication Shown On Display; Putting The Machine Out Of Service; Disassembly - Maytag MFR25PDCWS Installation Instructions Manual

13.6. ERROR INDICATION SHOWN ON DISPLAY

See chapter „Troubleshooting" in the programming manual.

14. PUTTING THE MACHINE OUT OF SERVICE

Disconnect the electric power supply from the washer.
Make sure that the power supply, water supply, drain and in case of steam, the steam supply, are all
disconnected.
Remove the electrical cable, drain hose, water hoses and in case of steam, the stream line from the washer.
Mark the machine "OUT OF SERVICE".
Remove the door completely from the washer.
Unscrew all nuts (bolts) which attach the washer to the foundation.
Place the washer in a safe place for further handling.

14.1. DISASSEMBLY

CAUTION! Take All Necessary action and precautions when doing disassembly of the washer to avoid
injuries by glass or sharp metal edges.
Sort out the parts for metal, non-metal, glass, plastics and bring them to recycle places.
Bearing house contains grease - DO NOT put in the trash, earth or sewer. Bring to a place for environmental
friendly destroying.
516828 PUBLICATION DATE Nov 05 INSTALLATION INSTRUCTIONS 19