Table of Contents
Advertisement
5.5.1
Trusted Computing
Configuration
Security Device Support [Enable]
Allows you to enable or disable the BIOS support for security device.
Configuration options: [Disabled] [Enable]
5.5.2
PSP Firmware Versions
This page displays the PSP firmware versions.
5.5.3
APM Configuration
Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
5-12
Chapter 5: BIOS Setup
Advertisement
Table of Contents
