T&B&S [Cut Sheet] Adjustment - Epson Stylus Pro 4880 Manual

Stylus Pro 4880 Field Repair Guide
Note: This function sets the top, bottom, and side margins for cut sheet paper.
1. Load A4 Enhanced Matte cut sheet paper.
2. From the Adjustment Wizard
T&B&S [Cut Sheet] Adjustment
T&B&S [Cut Sheet] Adjustment
for the Pro 4880, select the
Printer Component, Software Item,
T&B&S [Cut Sheet].
1. Click on the Print
2. The Printer will print out this pattern, and mea-
sure the side margin using the Multi Sensor.
3. Measure the top (leading edge) margin, and
enter the value measured.
4. Measure the bottom (trailing edge) margin, and
enter the value measured.
5. Enter the side margin value printed on the print
out, labeled "Side Margin Adjust".
6. Click the Write button.
7. Repeat Steps 1 - 4.
8. Measure the side margin, and enter the value.
9. Click the Write button.
10. Click the Finish
LCD Display, Printer Button
button.
button.
1/17/08
Page 186.