Sharp HT-SL50 Operation Manual page 8

HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled. For details, refer to the operation manual of the TV.
●
For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.
●
For TV without HDMI, headphone or RCA (variable output) connection is required.
Recommended Connection:
TV Type
with HDMI
( ver1.4 with ARC)
with HDMI
HDMI TV without
CEC & ARC or non
HDMI TV
Accessories
The following accessories are included.
RCA to Headphone Cable
(1pin - 2 pins) x 1
Wall Mount Angle x 2
This product has no remote control.
ENGLISH
CEC FUNCTION
MUST BE ENABLED
MUST BE ENABLED
NONE
Subwoofer Stand x 2
Pattern Paper
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
Audio Cable x 1 HDMI Cable x 1
Speaker Wire Sound Bar Stand x 2
E-1
CONNECTION METHOD
Page 7, Method 1
Page 8, Method 2
Page 9, Method 1
Page 9, Method 2
Foot Cushion x 4
Sound Bar Stand
Cushion x 2