Normal Phenomena - Haier CHM11BPL3 Service Manual

SERVICE MANUAL
Model ：CHM11BPL3

8-1. Normal phenomena

Problem
Freezer does not Temperature control in OFF or Min
operate or or 0 position.
Power-On Light is
Freezer is unplugged.
not on
The fuse is blown/circuit breaker is
tripped.
Freezer Door/lid left open.
starts/stops too
frequently
Too frequent or too long to door/lid
openings.
Temperature control set too cold.
Freezer operates Door/lid left open.
too long
Too frequent or too long door/lid
openings.
Temperature control set too cold.
Inadequate air circulation space
around cabinet.
Fast Freeze switch is in the ON
position (on some models)
Noisy operation Floor may be weak, causing
or cabinet vibrates freezer to vibrate when
compressor is on.
Cabinet is not positioned solidly on
floor
Freezer Door/lid left open.
temperature too
warm
Too frequent or too long door/lid
openings.
Temperature control OFF or Min or
Foods defrosting 0 positions.
；
Possible Causes
Issue
REV
What To Do
Move the control to a temperature
setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding
door/lid open.
/
See About the operation of your freezer
Check to see if package is holding
door/lid open.
Reduce opening time
See About the operation of your freezer
See Preparing to install the freezer
See About the operation of your freezer
Placing 2 X 4s (51 mm X 102 mm) under
the length of the freezer will help support
it and may reduce vibration.
See Preparing to install the freezer Or
use shims for uneven floor
Check to see if package is holding
door/lid open.
Reduce opening time
Move the control to a temperature
setting.
2020-5-15
Ref1607S002V0
15