WH-1000XM4
2-5.
BATTERY WIRE CONNECTOR (R-ch)
–
–
Turn around.
ornament (R) block
2 Open the ornament (R) block
in the direction of the arrow.
28
housing block (R-ch)
1 two tapping screws P2
(L = 8.0 mm) (silver)
(See Fig. T)
1 two tapping screws P2
(L = 8.0 mm) (silver)
(See Fig. T)
There are only four screws (silver color) required to
remove the ornament (R) block as shown in the figure
below. Do not remove the other screws.
–
–
rib
SUB R board
4 Draw the battery wire
connector out of the
connector in SUB R
board.
lithium ion storage battery
battery wire
SUB R board
Sony CONFIDENTIAL
For Authorized Servicer
screw to remove
(silver color)
screw to remove
(silver color)
3 Draw the battery
wire out of the rib.
rib
Press.
battery wire connector
SYS SET