Advertisement
Quick Links
Advertisement
Summary of Contents for Lenovo smart lock F1 PRO
- Page 1 USER MANUAL...
-
Page 2: Admin Settings
1 : ADMIN SETTINGS 1.1 : ADD ADMINISTRATOR PASSWORD Press [*] twice, it will give the voice prompt “Please add 6-digit Administrator Password and press [#] key to confirm”, user input 6-digit password and press [#] key to confirm. It will give the voice prompts “Please add 6-digit administrator password again, press [#] to confirm”, then enter the same set of group password. -
Page 3: Add Fingerprint
2 : USER SETTING 1. Add Face 1. Promp: Please Record 1. Add Users 2. Add Fingerprint, Positive Face. 2. Delete User Password or RFID Card. If 2. Please add Fingerprint, 3. System Settings You Add Password, Please Password or RFID Card Press [#] to confirm Light up the touch screen and press [*] twice, please use the Administrator Fingerprint or Password for verification to enter the main menu. - Page 4 2.4 : DELETE USER Press [*] twice on the touch screen to verify with the Administrator’s Fingerprint or Password to enter the main menu. To enter the main menu, you must enter the administrator information to verify. After entering the main menu, users can press the corresponding numeric key to select the operation according to the menu number.
- Page 5 3 : METHOD OF USE 3.1 : OPERATION IN THE COMMON MODE 3.1.1 : FACE UNLOCK Make the recorded face close to the lock. When the lock end recognizes the face information, and face is verified successfully, it will give a voice prompt “verify successfully, and the lock has been opened”. 3.1.2 : PINCODE UNLOCK Wake up the panel to enter the password + [#] key.
-
Page 6: Factory Data Reset
4 : FACTORY DATA RESET CAUTION After the factory Settings are restored, all user data will be Press This Key cleared. Exercise caution when performing this operation. to Restore Factory Defaults 5 : PRODUCT INTRODUCTION Peep Hole Camera Face Recognition Camera Battery Compartment Password Area Card Reading Area... - Page 7 www.lenovosmartlock.com...