Replacing A Front Turn Signal Light Bulb; Replacing A Rear Turn Signal Light Bulb - Yamaha NMAX GPD150-A Owner's Manual

Replacing a front turn signal
light bulb
1. Place the vehicle on the center-
stand.
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
Periodic maintenance and adjustment
EAU43054
1. Turn signal light bulb
1
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
7-33
Replacing a rear turn signal
light bulb
1
1. Open the seat. (See page 4-14.)
2. Remove the grab bar by removing
the bolts.
1
1. Grab bar
2. Bolt
3. Remove the taillight cover by re-
moving the screws.
EAU67320
2
7