Related Manuals for Smeg GW0260
Summary of Contents for Smeg GW0260
- Page 1 GW0260 - GW1260 - GW4260 GW4290 GW – LABORATORY GLASSWARE WASHERS USER MANUAL TRANSLATION OF THE ORIGINAL INSTRUCTIONS User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 1 – 86...
-
Page 2: Table Of Contents
With cycle preselected – information about program parameters ..........33 8.4.1 Adjustments to current program ..................... 34 SELECTING A PROGRAM ........................34 STARTING THE PROGRAM ....................... 34 User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 2 – 86... - Page 3 IF THE DEVICE IS TO BE OUT OF USE ....................67 13.4.1 FOR A FEW HOURS ........................67 13.4.2 FOR 24 HOURS OR MORE ......................67 13.4.3 FOR 10 DAYS OR MORE ......................67 User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 3 – 86...
- Page 4 GW4290 ........................... 80 14.9 CONNECTIONS AREA – ELECTRICITY AND WATER ................81 14.9.1 CONNECTIONS TO 60 CM DEVICE – GW0260, GW1260, GW4260 .......... 82 14.9.2 GW1260, GW4260 – Position of optional RS232 and LAN data ports........83 14.9.3 CONNECTIONS TO 90 CM DEVICE .................... 84 14.9.4...
- Page 5 193909119 24/03/2023 Ins. GW0260 193909119 27/01/2023 First issue Code Rev. Date Notes User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 5 – 86...
-
Page 6: Initial Instructions
Illustrations and the colours used in photographs, drawings and the forms which reproduce the display are purely guideline, and intended to ensure that the user correctly understands the operating concepts described in the text. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 6 – 86... -
Page 7: Intended Purpose And Classification
The manufacturer declines all liability for any damage caused by the use of the device to wash instruments not approved by their manufacturers for automatic decontamination by means of thermal disinfection. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 7 – 86... -
Page 8: Life Cycle
Staff training should be checked regularly. The installation engineer is responsible for ensuring that the device operates correctly after commissioning. Safety information supplied in compliance with IEC 61010-2-040. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 8 – 86... -
Page 9: Presentation
Default connection 60 Hz, three-phase with neutral: 380 – 400 V 3N~ Three-phase connection without neutral, 60 Hz: 220 – 230 V 3~ 60 Hz Single-phase connection 60 Hz: 220 – 230 V ~ 60 Hz User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 9 – 86... -
Page 10: Table Of Accessories
On 60cm models, GW1260 and GW4260: optional pumps P3 and P4 can only be installed as alternatives to each other. On GW4290 both optional pumps, P3 and P4, can be installed. Contact your authorised dealer for information and explanations. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 10 – 86... - Page 11 Integral drain pump for wall drain Conductivity probe Double drain valve Non-customisable factory-set programs + 2 Service Custom programs Side cabinet to accommodate detergent jerry cans Electrical main switch User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 11 – 86...
- Page 12 Integral drain pump for wall drain Conductivity probe Double drain valve Non-customisable factory-set programs Custom programs Side cabinet to accommodate detergent jerry cans Electrical main switch User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 12 – 86...
- Page 13 Integral drain pump for wall drain Conductivity probe Double drain valve Non-customisable factory-set programs Custom programs Side cabinet to accommodate detergent jerry cans Electrical main switch User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 13 – 86...
- Page 14 Integral drain pump for wall drain Conductivity probe Double drain valve Non-customisable factory-set programs Custom programs Side cabinet to accommodate detergent jerry cans Electrical main switch User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 14 – 86...
-
Page 15: Ref - Configuration Identifier
Chamber and inner door STD, AISI 316 Chamber and inner door AISI 304 Chamber in AISI 316, inner door in AISI 316 and Glass (G: Glass) User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 15 – 86... -
Page 16: Safety And Precautions For Use
Do not touch live parts if the power supply has not been disconnected. Laboratory Sector. USB port – Data communication and programming of the device. Transport, storage and unpacking precautions. Biological hazard. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 16 – 86... - Page 17 The REF of a product, which appears on its technical dataplate, is its “catalogue number”, the code which enables unique identification of its configuration (e.g. “GW4260-SC-000”). User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 17 – 86...
-
Page 18: General Warnings
If drying performance deteriorates, users should have the filter changed earlier. The device does not signal this type of wear, but only wear arising from the hours actually worked. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 18 – 86... - Page 19 Do not place alcohol or solvents such as turpentine, which might cause an explosion, inside the device. Do not place materials dirty with ash, wax or paint inside the device. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 19 – 86...
-
Page 20: Warnings For Handling The Device
As far as possible, the product should not be moved around by hand. If manual handling is unavoidable, at least 3 or more people must be used. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 20 – 86... -
Page 21: Accessing And Reusing The Device After An Incomplete Cycle And Accessing The Device At End-Of-Life
Contact authorised technical staff in the event of a failure. Do not touch the heating elements. Fig. 1 – Guideline view of inside of chamber, detail of heating elements. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 21 – 86... -
Page 22: Opening And Closing Of The Door
COMPLETE INSIDE the chamber before closing the door. Shutting the door with the trolley only partially inserted might damage the device. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 22 – 86... -
Page 23: Manual Door Unlocking / Opening Procedure
REUSING THE DEVICE AFTER AN INCOMPLETE CYCLE” point. Contact authorised engineers for detailed information about unlocking the door by hand: specific tools must be used by authorised engineers. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 23 – 86... -
Page 24: Opening The Hatch Of The Side Cabinet - Gw4290 Only
Fig. 4– Opening the GW4290 side cabinet hatch. Once the side cabinet hatch is open, the user has access to the device’s main switch (and the printer, if installed). Fig. 5 – Cabinet open: correct position of detergent jerry cans. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 24 – 86... -
Page 25: Commissioning
This means that the excess saline solution will be immediately removed by the water; prolonged presence of salt water inside the washing chamber may cause corrosion. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 25 – 86... -
Page 26: Adjusting The Spray Arm Washing Pressure
Setting 3: maximum flow-rate in lower spray arm. When using standard trolleys, keep on setting 1. Fig. 7 – Flow regulator on lower spray arm. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 26 – 86... -
Page 27: Usingdetergents
– Detergent intake STANDARD configuration. Fitting the detergent intake pipe to the jerry can. Fit the rubber cap over the top of the can for a perfect, secure connection. The pipe is supplied complete with intake filter. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 27 – 86... - Page 28 - near the device, on a specific, stable surface, for 60 cm models: GW1260, GW4260. Example of placing of jerry cans near 60 cm device. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 28 – 86...
-
Page 29: Basic Operation
On series without dryer, the functions of buttons P2 and P8 are different from on other models: used to regulate drying where present, they increase and decrease setup menu parameters on all models. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 29 – 86... -
Page 30: Buttons
Increases value of selected parameter. Door unlock Scroll left Select previous item in menu. Confirm selected/edited value. Hold down. Scroll right Select next item in menu. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 30 – 86... -
Page 31: Display And Icons
Start/Stop icon: indicates that the cycle On (not flashing): identifies that can be started. the button can be pressed to stop the cycle. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 31 – 86... - Page 32 Low detergent level. Change the jerry cans. Routine maintenance required. Drying filter change required. [Icon without exclamation mark: filter about to expire] Setup in progress. Alarm detected. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 32 – 86...
-
Page 33: With Cycle Preselected - Information About Program Parameters
– A icon On 3. Dosage of peristaltic pumps P1, P2 ..– peristaltic pump icon On 4. Drying target temperature – Dryer icon On User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 33 – 86... -
Page 34: Adjustments To Current Program
Starting from the preselected program, use the selector buttons (right/left) to scroll the programs available. 8.6 STARTING THE PROGRAM After selecting the program required, lock the door and press Start to start it. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 34 – 86... -
Page 35: Program Running
The second line of the display shows the current temperature in the chamber and the other parameters of the phase in progress can only be scrolled using the Gears (Functions) button. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 35 – 86... -
Page 36: Program Completed
The user must refer to the Warning table to assess the alert. The user cannot unlock the door and access the load until they have acknowledged the warning with the Confirm button. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 36 – 86... -
Page 37: Alarms - Serious Anomalies
Here again, the user must check the meaning of the code in the “Alarm Table” and then act accordingly to prevent possible damage to the device, the load or the installation location. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 37 – 86... -
Page 38: Setup And Parameter Setting Procedures
DE, ES, PT, PL Printer type 01, 02 R + W R + W Demi water ON, OF R + W Electrical 7.0, 3.0 R + W connection User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 38 – 86... - Page 39 To reprint the last cycle and parameters. Saves log on USB and clears the R + W R + W memory. Displays FW About versions. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 39 – 86...
-
Page 40: Accessing The Menus
[With a decimal point for values from 0.0 to 0.9 ml/litre. From 1 ml/litre: the character on the right indicates the units and the decimal point disappears.] User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 40 – 86... - Page 41 IT, EN, FR, DE, ES, PT, PL. Prt – Printer type [Prt stands for “printer type”] PRt01 -> Custom (standard) PRt02 -> Zebra (“PrinteInk”) User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 41 – 86...
- Page 42 NT-OF (default): LAN connection absent. NT-ON: LAN connection present. DEM: Display Easy Mode Display operating mode DEM: ON (default) display easy mode. DEM: OF full display. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 42 – 86...
- Page 43 Can be changed to AL – Alarm. In this case detergent anomalies are classified as Alarms: they stop the current cycle and are recorded in the log. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 43 – 86...
-
Page 44: Setting The Time - Clock Menu
P2 and Use buttons P4 or P6 to switch from setting to minutes to hours. Confirm with P5 when done. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 44 – 86... -
Page 45: Setting The Date - Date Menu
9.5 DRY HOUR COUNTER – DryH Description Illustration Function DryH is read-only and displays the operating hours of the drying system. Incremental absolute counter. Cannot be modified. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 45 – 86... -
Page 46: Cycle Counter - Count
To restore the configuration and equipment values to the Factory values, set and confirm “FV” (factory values). [Change value with P2/P8, confirm with P5.] User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 46 – 86... -
Page 47: Reset Me - Machine Equipment
Authorised engineer, by holding down button P5, after the drying system filters have been changed. The value is returned to the default value (DF 50) and the countdown restarts. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 47 – 86... -
Page 48: Reset Rm - Number Of Cycles Remaining Before Maintenance
The R and L buttons are used to switch between the two options. [During printing and until it is completed: the buttons are disabled.] User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 48 – 86... -
Page 49: Log - Management Of Internal Log, Downloading Of Log File To Usb Drive
Master environment. Press the R button to scroll to the Model version. The second rectangle also lights up. … User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 49 – 86... -
Page 50: Memory And Printout
- terminates by completely emptying out the water from the chamber. This is not recorded as an event in the program record. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 50 – 86... - Page 51 If the cycle was interrupted due to an anomaly or forced interruption by the user: 7579.70 “Cycle failed” 7579 is the value of the parameter A , calculated during the thermal disinfection phase. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 51 – 86...
-
Page 52: Editing Custom Programs
2. form part of the set of programs installed; 3. appear at the end of the list of non-editable factory-set programs. Consult the authorised after-sales service for further information. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 52 – 86... -
Page 53: Recommended Detergents And Important Notices
P3 and P4 – Optional Contact the manufacturer for advice on the best additive for your specific use. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 53 – 86... - Page 54 FLAMMABILITY Always refer to detergent technical data sheets to assess products’ flammability. Do not use flammable products in the device. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 54 – 86...
-
Page 55: Preparing The Load For The Washing And Disinfection Cycle
Specific instructions for the load drying phase, where provided: For optimal DRYING, the load for processing must never exceed: 15 kg. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 55 – 86... -
Page 56: Alarms, Warning And Device Response To Blackouts
N.B.: some events may be classified as alarms or warnings depending on how the product’s parameters are set. The full identification provided on the display defines their status. Example: W 41 -> Warning 41 AF41 -> Alarm 41 User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 56 – 86... -
Page 57: Warnings
Routine maintenance required. These are inspection and maintenance operations which must be performed by authorised staff to keep the device safe and in good working order. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 57 – 86... -
Page 58: Warning Table
Alternating with the W 730 code, a further alarm code is shown, e.g. “E 01” or “E 04”. If the problem persists, please notify the technician of the error codes. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 58 – 86... -
Page 59: Alarms
.Switch off the power to the device at the external main switch and wait 10 seconds before restoring the power. .Check that the device switches to normal standby status. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 59 – 86... -
Page 60: Alarm Table
Also check that there no leaks from the device (no water around AF:23 level too low. it). If there are leaks: turn off all water supply taps at once and contact the after-sales service. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 60 – 86... - Page 61 W / AF:41 P1 detergent intake anomaly 1. Check that the detergent intake nozzle is correctly positioned in the can. W / AF:42 P2 detergent intake anomaly User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 61 – 86...
- Page 62 - The program contains parameters not consistent with the product’s configuration. If the program has been created/customised with the app: check the parameters, comparing them with those of a Factory program. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 62 – 86...
- Page 63 Configuration parameters error. User: follow the DEFAULT PROCEDURE described above. If the AF:602 alarm does not disappear, follow the RESET PROCEDURE. Washing parameters error. AF:603 User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 63 – 86...
-
Page 64: Cleaning And Maintenance
After cleaning: run a washing cycle with no load to eliminate any detergent residue. Fig. 9 – The outside of the device must be cleaned. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 64 – 86... - Page 65 For trolleys with fixed spray nozzles: refer to the trolley manual for cleaning instructions. Fig. 1149 – Device lower spray arm: disassemble and clean all spray arms periodically to ensure effective washing. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 65 – 86...
-
Page 66: Cleaning The Filtering Unit
• Hold of the levers of the coarse conical filter and turn it anticlockwise (C). • Raise the entire unit (D). When cleaning this filter, all the other filter elements should also be cleaned. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 66 – 86... -
Page 67: If The Device Is To Be Out Of Use
24 hours or more. The program must be performed with the device empty, without a load in the washing chamber (Recommended T_target=93 °C). User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 67 – 86... -
Page 68: Maintenance And Routine Check Time Intervals
The manufacturer declines all responsibility in the event of device malfunctions, or injury or damage, arising from the failure to comply with the above recommendations. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 68 – 86... -
Page 69: Troubleshooting
If the problem persists after following the troubleshooting instructions above, call your authorised after-sales service. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 69 – 86... -
Page 70: Installation
Use a spirit level to level it: maximum tolerance angle 0.5°, corresponding to a maximum difference in height between opposite corners of the device of about 5 mm). Accurate levelling is important to enable the device to function correctly. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 70 – 86... -
Page 71: Installation On Stand
GW4260: ref. code B6040L or T6040. For GW4290: ref. code B9040L. Consult the manufacturer for information on compatibility. Only use stands authorised by the manufacturer. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 71 – 86... -
Page 72: Electrical Connection Requirements
H07RN-F 3 x 2.5 mm (3G2.5), 450/750 V, (single-phase version, 2.8 kW) For single-phase versions only: the power supply cable can be fitted with Schuko plug on request. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 72 – 86... -
Page 73: Water Connection Requirements
Regular checks must be made (e.g. every 6 months/1 year) on the intake water to ensure that the initial values are maintained, to allow the device or treatment system parameters to be corrected if the characteristics change. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 73 – 86... -
Page 74: Demineralised Water Requirements
If PAD2X is installed, the unpressurised tank may be at the same level as the surface on which the device stands, L ≥ 0. Fig. 16 – Unpressurised tank, height above device installation surface L > 100 cm. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 74 – 86... -
Page 75: Water Drain Requirements
Fig. 17 – Adapter with connector for 1/2" hose. Diagrams for correct calculation of the height H of the drain, in various configurations. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 75 – 86... -
Page 76: Technical Characteristics
8 °C – 50 °C Max hardness: 0.5 °f (0 ppm CaCO Max. conductivity and pH: 30 µS/cm / 5 ÷ 8 pH TDS max 40 mg/litre User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 76 – 86... -
Page 77: Electrical Connections
* The electrics of the Standard version can be configured, by technical staff authorised by the manufacturer, for the following power supply types: - three-phase without neutral (ref. WD-EC-3); - single-phase, lower power (ref. WD-EC-1). User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 77 – 86... -
Page 78: Ambient Conditions
EN 61010-1:2010/A1:2019/AC:2019-04, EN IEC 61010-2-040:2021 - European directive 2014/30/EU [Emc]: European harmonized Standard EN IEC 61326-1:2021 - 2011/65/UE including delegated directive (EU) 2015/863: European harmonized Standard EN IEC 63000:2018 User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 78 – 86... -
Page 79: Dimensions Of Product And Connections
Nota 3: enough space must be added at the side to take the detergent jerry cans (they can be placed on either the left or the right of the device). 500 mm is recommended. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 79 – 86... -
Page 80: Gw4290
Note 1: for special requirements, the device can be requested with top of reduced height: in this case the height of the device is 30mm less than shown. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 80 – 86... -
Page 81: Connections Area - Electricity And Water
The taps and hoses must be positioned in such a way that removing the hoses from the taps for service procedures does not cause water spills onto the device. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 81 – 86... -
Page 82: Connections To 60 Cm Device - Gw0260, Gw1260, Gw4260
Peristaltic pump P3/P4 intake hose and P3/P4 jerry can detergent level sensor cable (optional) RS-232 port for printer connection Ref. “WD-PRINTE” product 14.9.1 CONNECTIONS TO 60 CM DEVICE – GW0260, GW1260, GW4260 Rear view Front view The position of the USB port is marked... -
Page 83: Gw1260, Gw4260 - Position Of Optional Rs232 And Lan Data Ports
Fig. 18 – Position of the RS-232 serial port and the LAN port, both optional accessories, on the rear of the device. The RS232 port is preset for connection of a remote table-top printer. User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 83 – 86... -
Page 84: Connections To 90 Cm Device
On GW4290, detergent intake connections “P1” and “P2” are inside the right-hand side cabinet. The connections are marked for identification with P1 (detergent) and P2 (neutraliser). User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 84 – 86... -
Page 85: Gw4290 - Position Of Optional Lan Port
Fig. 19 – Position of the optional LAN port on the rear of the device. [GW4290 does not have an RS232 port as it is designed for installation of a built-in panel printer.] User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 85 – 86... -
Page 86: After-Sales Service And Manufacturer Contact Details
Single contact number for Italy +39 0522.160.60.50 Email: assistenza.instruments@smeg.it • For sales information: Email: instruments@smeg.it International Customers Please contact your Local Smeg Distributor or write an email to service.instruments@smeg.it User Manual GW0260 - GW1260 - GW4260 - GW4290 193909119 rev.01 Page 86 – 86...