Advertisement
Quick Links
TECHNICAL SERVICE BULLETIN
Non-Convection Microwave/Trim Mounting Kit (681680)
This Non-Convection Microwave/Trim Mounting Kit has been designed to improve the way in which the non-
convection microwave is secured to the trim kit base. The kit is available for the following SKUs:
BA268810
HMT5720
MET30EB
Parts included
Base supports
Follow the instructions below to uninstall the original trim kit parts and install the parts included in the service kit.
Uninstall the Original Trim Kit Parts
1
Remove trim kit frame.
3
Unplug power cord.
BA268830
HMT5020
HMT5750
HMT5760
MET30ES
Latches
#8-18 Screws
½" Drywall screws
Self-tapping bolts
HMT5050
MET27EB
Anti-tip tabs
2
Slide microwave forward until power cord and receptacle
can be reached.
4
Remove 2 screws from base assembly. Remove and
discard base.
HMT5060
MET27ES
Rear slots
Base assembly
Advertisement
Related Manuals for Bosch 681680
Summary of Contents for Bosch 681680
- Page 1 TECHNICAL SERVICE BULLETIN Non-Convection Microwave/Trim Mounting Kit (681680) This Non-Convection Microwave/Trim Mounting Kit has been designed to improve the way in which the non- convection microwave is secured to the trim kit base. The kit is available for the following SKUs:...
- Page 2 Assemble and Install the Mounting Kit By hand, bend the right and left anti-tip tabs on the Install base assembly. With drill or Phillips screwdriver, base assembly upward to a 90°angle. insert two ½” screws (circled below) into existing holes for proper alignment.