Eco Friendly / Auto Standby Function; Selecting The Input Source; Channel Selection; Listening To The Radio (Radio Mode) - JVC LT-55C550 Instruction Manual

Eco Friendly / Auto Standby Function

The latest eco-friendly power saving technology will automatically switch the TV into standby mode if the TV is left on and idle
for 4 hours or it does not receive an input signal for serveral minutes. A reminder screen will pop up and count down before the
switches to standby mode. Once the TV is switched to standby mode, the red LED indicator will illuminate on the front panel of
the TV.
Press the button on the right bottom panel under the TV frame or on the remote control to turn on your TV. The red LED
indicator will turn off and a pop up message will be prompt on the screen AFTER wake up from standby. To turn off the auto
standby function, please refer to page 37 Auto Standby under the Time Settings section.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The button on the right bottom panel under the TV frame or on the remote control is only used for switching the TV
into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please
remove the mains plug from the mains socket.

Selecting the Input Source

1. Press the button on the right bottom panel under the TV frame or the INPUT
button on the remote control to display the Input source list.
2. Press the buttons to select the input source that you want: DTV / ATV /
SCART / YPbPr / PC / HDMI1 / HDMI2 / HDMI3 / AV / USB.
3. Press the OK button to confirm your selection. If you do not press the OK button
to confirm, the TV will automatically confirm the selected input source within 4
seconds.
Alternative
Press the TV.RD button to switch to TV / digital radio channels directly.

Channel Selection

Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
•
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 46 for details on Block Channel).
• Press the FAV button to view the Favourite List. Then use the
button to view the selected channel (refer to page 29 for details on Channel Edit).
• Press the button to return to the previously viewed channel.

Listening to the Radio (Radio Mode)

• In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
• Press the CH / buttons on the remote control repeatedly to change the radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to listen to the selected station.
Press the GUIDE button to see all the stations in the Programme Guide (refer to page 48 for details on EPG).
•
buttons to highlight and select the channel.
buttons to highlight and select the channel. Press the OK
buttons to highlight and select the station.
Initial Setup
4
Input Source
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
HDMI3
AV
USB
OK
25