Before First Use; Settings - AEG LWR98C166X User Manual

30 www.aeg.com
Press and hold the Minuterie and the
Niveau séchage buttons simultaneously
for a few seconds. The indicator
appears on the display and the door is
locked. Now it is possible to start the
programme remotely.
To remove the Remote Start, press and
hold the Minuterie and the Niveau
séchage buttons simultaneously for a
few seconds until the indicator
disappears on the display.
9.5 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.

10. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

11. SETTINGS

11.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Stains/Prewash and the
Delay Start buttons simultaneously
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
9.6 Wi-Fi Always On
The Wi-Fi Always On function is
available in the App.
This function keeps the appliance
connected to the network even when the
appliance is turned off.
The indicator goes on and off
intermittently (1 second on , 5 seconds
off).
It is possible to turn the appliance on by
pressing the Marche/Arrêt button or
through the App.
The Wi-Fi Always On
function may affect your
energy consumption.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
until the indicator
off on the display.
You can activate this option:
• After you touch the Départ/Pause
button: all the buttons and the
.
comes on/goes