Advertisement
Installation of Outside Unit
2. Selection of the best Location
Select space for installation outside unit, which will meet the following conditions.
• Place with strength which bears weight of unit
• Place with space for air passage and service work
Don't install the unit at the space where generation, inflow, stagnation, and leak of combustible gas is expected.
• Avoid unit installation in a place where acidic solution and spray (sulfur) are often used.
• Location with no leakage of combustible gas
• Recommend the outside unit to be installed within 0~40°C.
• Location with installation or service work space.
• Do not use the outside unit under any special environment where oil, steam and sulfuric gas exist.
• Install in a separate machine room not exposed to external air
- Establish an anti-freeze plan for the water supply when the product is stopped during the winter.
- Install the product so that the noise from the machine room is not transferred outsides
• The floor of the machine room must be water proof.
• Drainage must be installed in the machine room to process the water drainage.
• Install a floor slope to make the drainage smooth.
• Avoid installing the outside unit in the location with following conditions.
• Location where corrosive gas such as acidic gas is generated.
(It may cause the refrigerant leakage by corrosion of the pipe.)
• Location where electromagnetic waves happen. (It may cause the abnormal operation by control parts disorder.)
• Location to be able to leak the combustible gas
• Location with carbon fiber or combustible dust.
• Location with the combustible material like thinner or gasoline. (It may cause a fire by leaking the gas near the product.)
< ! > CAUTIONS
• Do not install Multi V water outside. Always install ventilated indoors.
• Inverter product may generate electric noise. Keep the body from computer, stereo etc. at enough distance.
Specially leave space from indoor remote controller to shoes electric devices at the above 3m in weak electric wave area.
Insert the power cable and other wire into separate conduit.
3
Installation
Advertisement
