Table of Contents
Advertisement
19.2
Preparing for use after storage
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and exhaust system to rust.
–
Install the 12 V battery.
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing
for use. (
p. 24)
–
Make a test ride.
401059-01
STORAGE 19
(
p. 95)
p. 44)
117
Advertisement
Table of Contents
