Samsung DW60M5050 Series User Manual page 37

STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.04-1.0 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
CAUTION
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220-240 V~, 50 Hz.
• Install the product while the power cord is removed.
WARNING
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
- An 220-240 V~, 50 Hz fuse or circuit breaker.
- An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
STEP 3. PREPARING THE CUSTOM PANEL
(FOR FULLY BUILT IN AND SEMI BUILT IN DISHWASHER)
The custom panel should be processed in accordance with the illustrated dimensions.
38
DW5500MM_DD81-02615E-00_EN.indd 37 DW5500MM_DD81-02615E-00_EN.indd 37
589
566±0.2
A
451±0.2
540±0.2
2-Ø 2( 8)
20(MAX)
8-Ø 2( 8) A
30
4-Ø 2( 8)
436
A A-A
Fully built in
18
589
566 6-8
6-C1.5
220
36
1.5
8-9.5
1.5
220
Semi built in
Installing your dishwasher _37
2018-11-29 2018-11-29 10:51:43 10:51:43