Motorola MBP485-2 User Manual page 11

1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable mains power socket. Only use the enclosed
power adapter (5V DC / 1000mA) with the micro USB plug.
2. Press and hold the
the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the colour video captured by the Baby Unit, but if the baby's
room is dark, the video will display in black and white, with a
showing, due to the infra-red illumination by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off, a symbol will appear on the screen, and the Parent Unit will beep
repeatedly. Move the Parent Unit closer to the Baby Unit until the link is
re-established.
5. Press and hold the
On-Off LED turns off, to turn OFF the Parent Unit.
NOTE
The battery icon
parent unit will beep about every 15 seconds. The battery needs to be
recharged; it will take16 hours to charge fully.
When charging
1. If the Parent Unit is turned OFF when the adapter is plugged in, it will turn on
automatically and the Parent Unit On-Off LED at the top left will light up;
indicating that the adapter is plugged in and charging is continuing.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging.
Getting Started
0
POWER ON/OFF button for 3 seconds to turn ON
0
POWER ON/OFF button, until the Parent Unit
turns RED to indicate that the battery is low, and the
icon
11