Related Manuals for Smeg WDN064SLDIN
Summary of Contents for Smeg WDN064SLDIN
- Page 1 WDN064SLDIN Washer-Dryer User’s Manual Document Number : 2820531489_EN/ 23-06-23.(14:07)
-
Page 2: Table Of Contents
Temperature Selection ....27 Table of Contents Spin Speed Selection..... 28 1 Safety Instructions......Drying Programmes....... 29 Intended Use........Washing and Drying Programmes 29 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection.. - Page 3 Please read this user manual first! Dear Customer, Thank you for choosing Smeg product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
-
Page 4: Safety Instructions
1 Safety Instructions This section includes the safety – Personnel kitchens of stores, instructions necessary to pre- offices and other work envir- vent the risk of personal injury or onments; material damage. – Ranches, Our company shall not be held –... -
Page 5: Electrical Safety
with, climb on top or inside the • The product should not be fed product. Check inside the via an external switching product before use. device such as a timer or con- • Use child lock to prevent chil- nected to a circuit that is regu- dren from intervening with the larly switched on and off by a product. -
Page 6: Handling Safety
clean water mains and water Handling Safety outlet are suitable. If not, call a • Unplug the product before qualified electrician and moving, remove the water out- plumber to have them make let and water main connec- the necessary arrangements. tions. -
Page 7: Operational Safety
not use the product without • Place the power cable and suitable grounding to local/na- houses in locations without tional regulations. risk of tripping. • Plug the product in a socket • Do not install the product be- with voltage and frequency val- hind a door, a sliding door or at ues suitable to those indicated another location that will pre-... - Page 8 • Do not use chemical solvents “loading door does not open” on the product. These materi- error in the Troubleshooting als contain an explosion risk. section. • Do not operate defective or • Do not wash elements contam- damaged products. Unplug the inated with gasoline, kerosene, product (or turn off the fuse it benzene, reducers, alcohol or...
-
Page 9: Drying Safety
– Wipe the door gasket and • Do not dry textile products that loading door glass with a dry contain predominantly foam, and clean cloth at the end of rubber or rubber-like parts (e.g. the programme. shower caps, waterproof tex- •... - Page 10 hot steam if you open the • If there is a problem that you cover without completing the cannot solve using the inform- cooling step. Risk of seething. ation given in the safety in- • If the drying programmes are structions section, turn off and interrupted (as a result of pro- unplug the machine and call an...
-
Page 11: Maintenance And Cleaning Safety
• Do not use softener or anti- Maintenance and static agent unless recommen- Cleaning Safety ded by the manufacturer. • Do not wash the product with • Products such as softener pressure washers, by spraying should be used in accordance vapour, water or pouring water. -
Page 12: Package Information
center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collec- tion centers. Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive. -
Page 13: Technical Specifications
3 Technical Specifications Supplier’s name or commercial brand SMEG WDN064SLDIN Model name 7178576800 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) Single Water inlet / Double Water inlet... -
Page 14: Installation
4 Installation • Do not install the product at places where Please read the “Safety Instruc- temperature may fall below 0 ºC. Freez- tions” section first! ing might damage your product. • Leave a minimum space of 1 cm Your washing machine automatic- between the product and the furniture. -
Page 15: Removing Transportation Safety Bolts
Cover B WARNING Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place. -
Page 16: Connecting The Drain Hose To The
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn. -
Page 17: Adjusting The Stands
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply. -
Page 18: Preliminary Preparation
5 Preliminary Preparation • Tough stains must be treated properly Please read the “Safety Instruc- before washing. If you are not sure, tions” section first check with a dry cleaner. 5.1 Sorting the Laundry • Wash trousers and delicate laundry turned inside out. -
Page 19: Loading The Laundry
Drum Cleaning programme. If this pro- Follow the instructions in “Pro- gramme is not available in your product, ap- gramme and consumption table”. ply the method which is described in sec- When the appliances is overloaded tion "Cleaning the loading door and the product’s washing performance will drum". - Page 20 • Do not add washing chemicals (Liquid detergent, Softener, etc.) while the ma- chine is during Drying step. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry.
- Page 21 • If the softener is not fluid, dilute with wa- • Put the tablet detergent in the main ter before placing in the softener com- washing compartment (compartment no. partment. “2”) or directly inside the drum before washing. WARNING • Tablet detergents may leave residue in Do not use liquid detergents or the detergent compartment.
-
Page 22: Tips For Efficient Washing
• Oxygen-based decolourants can be used drawer and wait for the product to rinse together with detergents. However, if it away the detergent during water intake. does not have the same viscosity as the Add the decolourant to the same com- detergent, first place the detergent in partment while the machine continues compartment no. -
Page 23: Tips For Efficient Drying
5.9 Tips for Efficient Drying Programmes Washing and Cotton Dry Synthetic Dry Babyprotect+ Wash & Wear Drying It washes and It washes and Clothes such Sheets, bed- dries consecut- dries consecut- as shirts, t- dings, baby ively! Sheets, ively! Sheets, shirts, sweat- clothes, t- beddings, baby... -
Page 24: Operating The Product
tected by the machine. And if the detected programme duration increased automatic- load is higher than half load; washing pro- ally. You can follow this change on the dis- gramme will be adjusted accordingly and play. 6 Operating the Product Please read the “Safety Instruc- tions”... -
Page 25: Symbols On The Display
6.2 Symbols on the Display 1 Temperature Indicator 2 Door Lock Engaged Indicator 3 Drying Level Indicators 4 Programme Tracking Indicators 5 Duration Information 6 Programme Start Indicator 7 Delayed Start Enabled Indicator 8 Child Lock Engaged Indicator 9 Auxiliary Function Indicators 5 10 Auxiliary Function Indicators 4 11 Auxiliary Function Indicator 1 12 Auxiliary Function Indicators 3... -
Page 26: Washing Programmes
Programmes are limited to the Symbols shown on the display are highest spin speed appropriate for schematic and may not match with that particular type of fabric. the product one-to-one. When selecting a programme, al- If you do not want to perform dry- ways consider the type of fabric, ing process after the programme colour, soiling level and permissible... -
Page 27: Temperature Selection
be washable at 40 °C or 60 °C in a single • Apply the pre-treatment chemical directly cycle and dries them so that they can be on the laundry or add the detergent to the put in a cupboard immediately. machine from the powder detergent com- partment with the detergent. -
Page 28: Spin Speed Selection
Press the Temperature Adjustment button This function holds the laundry in the final to change the temperature. Temperature rinsing water. If you want to spin your laun- decreases gradually. dry after the Rinse Hold function: 1. Adjust the Spin Speed. No change can be made in pro- 2. -
Page 29: Drying Programmes
6.8 Drying Programmes When you will dry laundry consist- ing of towels and bathrobes only, load a maximum of 4,5 kilograms WARNING The machine automatically cleans of laundry. For the dry weight of the laundry, the lint that from the laundry during see Correct Load Capacity drying programme. -
Page 30: Programme And Consumption Table
• Anti Allergy Clean and Wear programme is de- signed to quickly wash and dry A steam step applied at the beginning of daily clothes that have been worn the program helps to soften the dirt. for a short time and are not heavily Use this programme to wash and quickly contaminated. - Page 31 *** : Eco 40-60 programme is a test pro- You can see the washing duration gramme according to 40 ° C temperature on the display of your machine selection, EU regulation EU / 2019/2014 while selecting a programme. De- and EN 60456: 2016 / A11: 2020 standard. pending on the amount of laundry Selection of 40 °C temperature and cup- you have loaded into your machine,...
-
Page 32: Auxiliary Function Selection
For drying: Auxiliary functions Drying level Tem- perat- Program °C ure Se- lection °C Cotton Dry 3,90 1400 • • • • • Synthetic Dry 2,50 • • • • Anti Allergy 3,80 1400 • • • • • 30-90 Cotton 6kg 6,00 1400... -
Page 33: Auxiliary Functions
6.11.1 Auxiliary Functions When an auxiliary function button that cannot be selected with the • Prewash current programme is pressed, the Pre-washing is only necessary for very dirty washing machine will make a warn- laundry. You save energy, water, detergent ing sound. -
Page 34: Functions/Programmes Selec- Ted By Pressing The Function Keys For 3 Seconds
• Steam This is not a washing program. This This function helps reduce wrinkles, reduce is a maintenance program. ironing times and soften and remove dirt Do not run this program with any- from your cotton, synthetic and mixed laun- thing inside the machine. -
Page 35: Drying Steps
When drying a small amount of laundry To activate child lock: (maximum 2 items), the timed drying steps Press and hold the corresponding auxiliary in Cotton or Synthetic dry programmes function button for 3 seconds. When the should be selected. "3-2-1"... -
Page 36: Starting The Programme
In order for the End Time function to be ac- 6.14 Starting the Programme tivated and the programme to be com- 1. Press Start / Pause button to start the pleted at the end of the specified time, you programme. must press Start/Pause button after adjust- ing the time. -
Page 37: Changing The Selections After Programme Has Started
Before opening the loading door, make sure that there is no water in the machine to avoid flooding. 1. Turn off and unplug the appliance. 2. Open the pump filter lid. If the water level in the machine is not suit- able when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains... -
Page 38: Cancelling The Programme
It gives out an audio warning if If you turn the programme selection change is not allowed. button when the Child Lock is en- The loading door will not open if the abled, the programme will not be water temperature in the machine cancelled. -
Page 39: Cleaning The Loading Door And The Drum
7.2 Cleaning the Loading Door and the 7.4 Cleaning the Water Intake Filters Drum There is a filter at the end of each water in- take valve at the rear of the product and For products with drum cleaning pro- also at the end of each water intake hose gramme, please see the Operating the where they are connected to the tap. -
Page 40: Troubleshooting
3. Follow the below procedures in order to NOTICE: drain water. Foreign substances left in the pump filter may damage your If the product does not have an emer- product or may cause noise prob- gency water draining hose, in order to lem. - Page 41 lection button or pressing and holding • Pump filter is clogged. >>> Clean the the On/Off button for 3 seconds to can- pump filter. cel the program. Previous programme Product stopped shortly after the pro- will be cancelled. See Cancelling the Pro- gramme started.
- Page 42 • Input temperature of water is low. >>> Product does not switch to spinning Required time to heat up the water ex- step. (*) tends in cold seasons. Also, washing • There is unbalanced load in the product. time can be lengthened to avoid poor >>>...
- Page 43 • Excessive laundry is loaded in. >>> Do dry. Keep detergents closed in an envir- not load the product in excess. Load with onment free of humidity and do not ex- amounts recommended in the "Pro- pose them to excessive temperatures. gramme and consumption table".
- Page 44 • Some meshed laundry such as tulle may Detergent residue in the detergent foam too much because of their texture. drawer. (**) >>> Use smaller amounts of detergent for • Detergent was put in wet drawer. >>> Dry this type of item. the detergent drawer before putting in de- •...
- Page 45 • Spinning might not be sufficient for laun- Loading door cannot be opened. dry. >>> Select a higher spin speed in the • The door of your machine might not be washing step of the Washer-Dryer. opening due to safety reasons. >>> If the door locked indicator is still active on the Machine does not start or programme display after the drying step, the machine...
- Page 48 The original spare parts for some specific components are available for 10 years from the placing on the market of the last unit of the model. Visit our website to: Get usage advice, download user manuals, get service and repair information www.smeg.com/services/customer-service...