Advertisement
Quick Links
About this Guide
This guide consists of 3 sections:
• Overview – Discusses the supported KB9000.
• Bump bar Functionality - Describes how to use the bump bar with the KDS.
• Appendix A – Key map for the KB9000.
This guide is relevant for:
KDS FW: v2.50 and above
KDS Utility (Windows): v2.5.0.0 and above
The KB9000 bump bar allows the operator to bump off orders and interact with the KDS
screen. It connects to the KDS printer or controller via USB. Part number for the
KB9000 bump bar supported:
Logic Controls KB9000A-USB
This part number is a KB9000 USB bump bar with standard default template:
Note: The bump bar is fully programmable so if you have a KB9000 with a different
legend sheet you can consult the Appendix for the key mapping. How to program is
beyond the scope of this document.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other
product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all
rights in these marks. Copyright 2022 Seiko Epson Corporation.
Bump Bar – KB9000
Overview
111-38-QUM-024
Rev 2.50
Advertisement
Related Manuals for Epson KB9000
Summary of Contents for Epson KB9000
- Page 1 EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all...
- Page 2 Pressing followed by the tile number will force bump the order associated with that tile. This is useful in the rare circumstance an order becomes stuck on the Expo screen. Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual...
-
Page 3: Scroll Mode
Press if the second digit is 0. The first item in that tile will become highlighted. Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual... - Page 4 Scroll mode exited. If there are other un-bumped items in the order then the item will become struck- through. Items can be un-bumped by pressing again. Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual...
- Page 5 To recall an order, select the desired order and press: Reprinting an Order Press to re-print the bumped order. Note the printing functionality must be enabled for this to work. Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual...
- Page 6 Press if the second digit is 0. Selecting Tiles 20-21: Press the number key Press Press to select tile 20 or to select tile 21. Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual...
-
Page 7: Appendix A - Key Mapping
Key name Key command Key name Key command BUMP (Bump) [Ctrl] RECALL (Recall) [PAD-] SUM (Summary) [Space] PAGE (Scroll) [ArrowDown] ↑ (Scroll up) [ArrowLeft] ↓ (Scroll down) [ArrowRight] REDRAW (Enter) [Enter] Bump Bar – KB9000 111-38-QUM-024 Rev 2.50 Quick User Manual...