Cases That Require Configuration - NEC EXP805 User Manual

Chapter 3 Setup
2.4

Cases that Require Configuration

If any of the following cases are applicable, operate in System Utility to change parameters from the factory
preset. Other than cases described below, do not change the settings. The catalog of parameters in System
Utility and the factory presets can be found in Chapter 1 (1. System Utility) of Maintenance Guide (Common).
Category
Settings to Items to be set at all
be saved in times
the user
default
Setting up the Time
Format in accordance
with your OS
If you use the
NEC ESMPRO
ServerAgentService
Description
Set to Allow Operation with Critical Fan
Failure at System Configuration >
BIOS/Platform Configuration (RBSU) >
Advanced Options > Fan and Thermal
Options > Fan Failure Policy.
Set System Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
USB Options > Internal SD Card Slot to
Disabled.
Set to Custom at System Configuration >
BIOS/Platform Configuration (RBSU) >
Workload Profile.
Set to No C-states at System Configuration >
BIOS/Platform Configuration (RBSU) > Power
and Performance Options > Minimum
Processor Idle Power Core C-State.
Set to No Package States at System
Configuration > BIOS/Platform Configuration
(RBSU) > Power and Performance Options >
Minimum Processor Idle Power Package C-
State.
・If you use Windows or Linux
Set to Coordinated Universal Time (UTC) at
System Configuration > BIOS/Platform
Configuration (RBSU) > Date and Time]-[Time
Format.
・If you use another OS
Set up following the pre-install checklist in the
installation guide of your OS.
Set to Disabled at System Configuration >
BIOS/Platform Configuration (RBSU) >
Advanced Options > Fan and Thermal
Options > Thermal Shutdown.
Express5800/R120h-2M (2nd-Gen) User's Guide
To be changed
2. Description on System Utility
(1/4)
Remark
At the time of shipment,
Fan Failure Policy is set
to Allow Operation with
Critical Fan Failures.
At the time of shipment,
Internal SD Card Slot is
set to Disabled.
At the time of shipment,
Workload Profile is set to
Custom.
At the time of shipment,
Minimum Processor Idle
Power Core C-State is set
to No C-states.
At the time of shipment,
Minimum Processor Idle
Power Package C-State is
set to No Package States.
Set up following the pre-
install checklists in the
installation guide below.
・If you use Windows
For Windows: Chapter 1
Installing Windows
At the time of high
temperature, shutdown is
executed by
NEC ESMPRO
ServerAgentService
235