14
ELECTRICAL SYSTEM
14.1
Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the battery.
–
Only charge in well-ventilated rooms.
–
Maintain the minimum clearance to inflammable materials while charging.
Minimum clearance
–
Over-discharged batteries with a charge of less than 9 V are not permitted to be charged. They must be disposed of.
14.2
Installing the battery
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the air filter box cover. (
–
Remove the seat. (
Main work
–
Pull back the negative terminal cover
the battery.
–
Pull back the positive terminal cover
the battery.
–
Remove screw
–
Pull holding bracket
120349-10
Main work
–
Insert the battery into the battery compartment with the terminals facing forward
and secure with the holding bracket
Battery (C22S) (
–
Mount and tighten screw
Guideline
Screw, battery support bracket
Info
Contact disks
ets
–
Connect positive cable
Guideline
Screw, battery terminal
–
Slide positive terminal cover
–
120350-10
Connect negative cable
1 m (3 ft)
p. 44)
p. 43)
.
forward and take out the battery toward the top.
p. 95)
.
must be mounted between screws
with the claws facing down.
to the battery.
over the positive terminal.
to the battery.
and disconnect negative cable
and disconnect positive cable
.
M6
10 Nm (7.4 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
71
from
from
and cable sock-