Asus XG-U2008 - 2-Port 10GBASE-T+8-Port Gigabit Unmanaged Switch Quick Start Guide

Getting to Know Your Switch

1. Power LED. This LED lights white when the switch is receiving power.
2. Status LED (1G). This LED blinks white when the port is activating and data is being transmitted or received.
3. Status LED (10G). This LED blinks blue when the port is activating and data is being transmitted or received at 10Gbps. This LED blinks white when the port is activating and data is being transmitted or received at 1Gbps.
4. Status LED (10G - left). This LED lights green when the RJ45 port is connected and enabled. This LED blinks green when the data is transmitted or received.
5. Status LED (10G - right). This LED lights green when the 10 Gbps link is available and the RJ45 port is enabled. This LED lights amber when the cable is not good for 10G-BaseT access.
6. Status LED (1G - left). This LED lights green when the RJ45 port is connected and enabled. This LED blinks green when the data is transmitted or received.
7. Status LED (1G - right). This LED lights green when the 1 Gbps link is available and the RJ45 port is enabled.
8. Power Button. Press this button to power on or off the system.
9. Power (DC-IN) port. Insert the bundled AC adapter into this port and connect your switch to a power source.

Connecting Devices to Your Switch

1. Connect the power cord.
2. Connect your devices.
3. Check the LED indicators for the status of the switch and the network.

Mounting Your Switch on a 19-inch Rack (Optional)

1. Attach the mounting bracket to the bottom side of the switch with the screws that came with the package.
2. Secure the bracket to a 19-inch rack with suitable screws, which are not included in the package.

NOTE: Contact local Customer Service for more information about the optional mounting bracket.