Table of Contents
Advertisement
Using other equipment
Digital output
[DVD-V] ]DVD-VR] [VCD] [CD] [WMA] [MP3]
Change the settings when you have connected equipment
through this unit's COAXIAL OUT terminal.
PCM Digital Output
Select the maximum sampling frequency of "PCM Digital
Output". Check the digital input limitations of the equipment
you connect.
Off:
When not connected digitally
"Up to 48 kHz" (factory preset):
Signals over 48 kHz converted to 48 kHz or
44.1 kHz
"Up to 96 kHz":
Signals over 96 kHz converted to 48 kHz or
44.1 kHz
[Note]
≥Signals from copy-protected discs are converted to 48 kHz
or 44.1 kHz irrespective of the setting.
≥Some equipment cannot handle sampling frequencies of
88.2 kHz, even if they can handle 96 kHz. Read your
equipment's operating instructions for details.
Dolby Digital, DTS Digital Surround and MPEG
"Bitstream" (Factory preset for "Dolby Digital" and "DTS Digital
Surround"):
Select if the equipment you connected can decode the signal.
"PCM" (Factory preset for "MPEG"
Select if the equipment you connected cannot decode the
signal.
§
MPEG: \For\Australia\and\N.Z.]
IMPORTANT
If the equipment you connected cannot decode the
signal, the setting must be changed to "PCM". If not,
signals the equipment cannot process will be output by
this unit, causing high levels of noise which can damage
your hearing and the speakers.
30
RQTV0141
§
§
):
Home Theater—Enjoying more powerful
sound
Enjoy the powerful movie theater and hall-like sound available
with multiple channel audio found on DVD-Video by
connecting an amplifier and speakers.
Before connection
≥Disconnect the AC power supply cord.
≥Turn off all equipment and read the appropriate operating
instructions.
≥The equipment connections described are examples only.
≥Peripheral equipment and optional cables are sold
separately unless otherwise indicated.
Amplifier (not included)
(DVD) IN
Coaxial digital cable
(not included)
Do not bend sharply when
connecting.
Back of the
main unit
DIGITAL OUT
(COAXIAL)
Recording Output
≥With DVD, the following conditions must be met: a the disc
does not have protection preventing digital recording, and b
the recording equipment can handle signals with a sampling
frequency of 48 kHz.
≥You cannot record WMA/MP3.
When recording DVDs, make the following settings.
– "Advanced Surround": "Off" (l page 27).
– "PCM Digital Output": "Up to 48 kHz" (l page 23, "Audio"
tab).
– "Dolby Digital"/"DTS Digital Surround"/"MPEG"
(l page 23, "Audio" tab).
VOLUME
Speakers (example)
Connect three or more
speakers for surround
sound.
§
: "PCM"
Advertisement
Table of Contents
