Table of Contents
Advertisement
3. Install the following components:
a)
System fan
b)
System board shield
c)
Back cover
d)
Stand
4. Follow the procedure in
Pop-Up Camera
Removing the pop-up camera
1. Follow the procedure in
2. Remove the following components:
a)
Stand
b)
Back cover
c)
System board shield
3. To remove the camera assembly:
a) Remove the two screws (M3x5) that secure the camera assembly cover to the middle frame [1].
b) Lift the camera assembly cover away from the middle frame [2].
c) Disconnect the camera cable from the system board and unroute the camera cable from the routing channel [3].
d) Remove the two screws (M3x5) that secure the pop-up camera assembly to the middle frame [4].
e) Slide and remove the pop-up camera assembly off the middle frame [5].
44
Removing and Installing components
After working inside your
computer.
Before working inside your
computer.
Advertisement
Table of Contents
