User’s Manual Foreword General This manual introduces the installation, functions and operations of the Wireless PIR Detector (hereinafter referred to as the "PIR"). Read carefully before using the device, and keep the manual safe for future reference. Model DHI-ARD1233-W2(868); DHI-ARD1233-W2 Safety Instructions The following signal words might appear in the manual.
Page 3
User’s Manual About the Manual ● The manual is for reference only. Slight differences might be found between the manual and the product. ● We are not liable for losses incurred due to operating the product in ways that are not in compliance with the manual.
User’s Manual Important Safeguards and Warnings This section introduces content covering the proper handling of the PIR, hazard protection, and protection of property damage. Read carefully before using the PIR, and comply with the guidelines when using it. Operation Requirements ●...
User’s Manual 1 Introduction 1.1 Overview Wireless PIR detector is a wireless motion detector designed for indoor use. It can detect a human moving within 12 m of the detector. It can be set up via the DMSS App for iOS and Android phones. 1.2 Technical Specifications This section contains technical specifications of the PIR.
Page 7
User’s Manual Type Parameter Description 12 m (39.37 ft) (90°) with installation height of 2.2 m Detection Range (7.21 ft) Detection Speed 0.3 m/s–3 m/s (0.98 ft/s–9.84 ft/s) Pet Immunity Level ≤ 18 kg (39.68 lb) White Light 2000 lx Resistance Level Two-way Digital Yes, no attenuation of detection distance in high...
Page 8
User’s Manual Type Parameter Description DHI-ARD1233-W2(868): ● EN 50131-1: 2006 + A2:2017 + A3:2020 ● EN 50131-2-2: 2017 DHI-ARD1233-W2: ● EN 50131-5-3: 2017 ● CE Certifications ● EN 50131-6:2017 ● FCC ● Security Grade (SG) 2 ● Environmental Class (EC) II ●...
User’s Manual 4 Adding the PIR to the Hub Before you connect PIR to the hub, install the DMSS app to your phone. This manual uses iOS as an example. ● Make sure that the version of the DMSS app is 1.91 or later, and the hub is V1.001.0000000.0.R.210303 or later.
User’s Manual 5 Installation 5.1 Field of View Field of view of the PIR are shown below. When installing and using the PIR, make sure there are no objects partially or fully obscuring the detector's field of view. Figure 5-1 Field of View 5.2 Installing the PIR BBefore installation, add the PIR to the hub and check the signal strength of the installation location.
Page 14
User’s Manual Figure 5-2 Installation location Step 1 Remove the back cover of the PIR. Figure 5-3 Remove the back cover Step 2 Drill four holes into the wall according to the hole positions of the PIR, and then put the expansion bolts into the holes.
Page 15
User’s Manual Figure 5-5 Attach the PIR to the back cover...
User’s Manual 6 Configuration You can view and edit general information of the PIR. 6.1 Viewing Status On the hub screen, select a PIR from the peripheral list, and then you can view the status of the PIR. Table 6-1 Status Parameter Value The status for whether the functions of the PIR are enabled or disabled.
User’s Manual Parameter Value Active status of the 24 h protection zone. 24 H Protection Zone ● : Enable. Status ● : Disable. The status of whether the PIR forwards its messages to the hub through the repeater. Transmit through Repeater The function is only available when the version of the DMSS app is 1.96 or later, the hub is V1.001.0000000.6.R.211215 or later, and the PIR is...
Page 18
User’s Manual Parameter Description ● If 24 H Protection Zone is enabled, even the system is disarmed, the PIR can be armed and detects motion. ● If 24 H Protection Zone is disabled, only when the system is armed, the PIR can be armed and detects motion.
Page 19
User’s Manual Parameter Description Video Channel Select the video channel as needed. Signal Strength Detection Test the current signal strength. Tap Start Detection to test the status of the detector. ● The detector test will not begin immediately. It will begin Detector Test before the end of the ping interval of the hub-detector (60 seconds by default).
User’s Manual Appendix 1 Cybersecurity Recommendations Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to the internet. IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks.
Page 21
User’s Manual 1024–65535, reducing the risk of outsiders being able to guess which ports you are using. 6. Enable HTTPS We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. 7. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing.
Page 22
User’s Manual device. More information Please visit Dahua official website security emergency response center for security announcements and the latest security recommendations.