Siemens CM776G1.1 User Manual And Installation Instructions page 8

en Familiarising yourself with your appliance
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1 Display
The display shows the current adjustment val-
ues, options or notes.
→ "Display", Page 8
Buttons
2
You can use the buttons to set various func-
tions directly.
→ "Buttons", Page 9
4.2 Display
The display is divided into different areas.
Status bar
The status bar is at the top of the display.
You can carry out actions depending on the setting
step.
Symbol Function
Go back one setting.
Open the basic settings.
8
1
2
Switch off the display in the basic settings.
→ "Basic settings", Page 20
¡ Energy is saved when the display is switched off.
Heat two glasses or cups of liquid at the same time.
¡ Heating several dishes at the same time requires
less energy than heating dishes one after the other.
Note:
The appliance requires:
¡ A maximum of 2 W in networked standby mode
¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off
In addition to the text information, you can see the cur-
rent status of different functions using symbols.
Symbol Meaning
Time, e.g. Display of the current time-setting op-
"12min10s" tions.
→ "Time-setting options", Page 15
Timer is activated.
→ "Setting the timer", Page 16
The childproof lock is activated.
→ "Childproof lock", Page 20
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Cleaning function 'Pyrolytic active-
Clean'", Page 25
→ "Basic settings", Page 20
Wi-Fi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no Wi-Fi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 22
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 22
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 22
The oven light is on or off.
→ "Lighting", Page 9
Settings area
The settings area is shown in tiles.
The individual tiles show you the current selection op-
tions and settings that have already been implemented.
To select a function, press the corresponding tile.
Information is also shown in tiles.
To scroll to the left or right if there are several tiles, use
the navigation buttons
play.
, there
and , or swipe over the dis-
, there