NEC P701 Installation Manual

P701 Installation Guide
70" LCD Display
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top, Right Side, Left Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions with Optional Peerless Fixed Wall Mount
Dimensions with Optional Peerless Tilt Wall Mount
Dimensions with Optional Chief Fixed Wall Mount
Input Panels
Control Codes
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•
Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
•
Monitor can only be rotated clockwise to achieve portrait orientation
•
Max 20º Tilt (Landscape Only)
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class A
600 W (typ)
2047.29 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Screen Surface:
Dimensions without stand: 66.1" (W) x 39.5" (H) x 7.8" (D)
Dimensions with stand:
Weight without stand:
Weight with stand:
.
Rotated Clockwise Only
Rev 1.3
Anti-Reflective
66.1"(W) x 41.8"(H) x 19.7"(D)
211.6 lbs
220.4 lbs
P701 Page 1 of 12