Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Dell P3424WE cerca il tuo prodotto tra le migliori offerte di Monitor Service Manual–P3424WEB Version: 01 Date:2022/11/07 - 1 -...
Content Index 1. General Safety Instructions ..................3 1.1 SAFETY: General Safety ..................3 1.2 SAFETY: General Power Safety ................5 2. Exploded view diagram with list of items ..............6 3. Wiring connectivity diagram ..................8 4. How to connect and disconnect power cable/ connectivity cable ......9 5.
IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety...
Page 4
When operating your equipment: Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement. Do not use AC powered equipment during an electrical storm. Battery powered devices may ...
If your equipment uses an AC adapter: Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion. NOTE: Refer to your system rating label for information on the proper adapter model approved for use with your device.
2. Exploded view diagram with list of items - 6 -...
Page 7
USB 3.2 Gen1 (5 Gbps) Type-A to Type-B upstream cable See “NOTE" NOTE: For replacement of power cord, connectivity cable and external power supply (if applicable), contact Dell: 1. Go to https://www.dell.com/support. 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom-right corner of the page.
4. How to connect and disconnect power cable/ connectivity cable WARNING: To change power cable/ connectivity cable, switch off power before unplugging the cable and replugging in required cable. Connect/ disconnecting the DisplayPort (DisplayPort to DisplayPort) cable and Power cable ...
Page 10
Connecting/ disconnecting the USB Type-C cable and Power cable Connecting/ disconnecting the RJ45 Cable (Optional) and Power cable Connecting/ disconnecting the SuperSpeed USB 5 Gbps (USB 3.2 Gen1) cable and Power cable - 10 -...
5. Disassembly and Assembly Procedures NOTE: This “Disassembly and Assembly Procedures” is for EMEA only, not for other regions. Please note that Dell will deem warranty void if any disassembly is done on the monitors. 5.1 Disassembly SOP Preparation before disassembly 1.
Page 12
1. Use hands or Scraper bar scraper bar to disassemble Rear Cover from the monitor. Notice the disassembly order: Left Side=> Top Side=>Right Side=>Bottom Side 2. Unplug “CTRL BD FFC” from I/F BD 1. Unplug USB FFC Philips-head from I/F BD screwdriver (Screw Torque:4.0-...
Page 13
1. Tear off 1 acetate tape and 1 yellow tape from EDP FFC 2. Unplug EDP FFC from panel 3. Take off Main SHD from Panel 1. Disassemble Mylar Philips-head Do not touch the from SHD screwdriver component without wearing (Screw insulating Torque: 8.5±1...
5.2 Assembly SOP Preparation before assembly 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment, materials as bellow: 1) Working table 2) Philips-head screwdriver 3) Gloves 4) Cleaning cloth 5) ESD protection 6) U3415WB Curve Sponge Jig Item Picture...
Page 15
Item Picture Operation Tool Notes 1. Place P3424WE U3415WB Panel and whole panel on curve sponge monitor head U3415WB Curve must be put Sponge Jig on U3415WB curve sponge 2. Insert EDP FFC to jig to avoid panel panel damage. It is not 3.
Page 16
Item Picture Operation Tool Notes 1. Insert “CTRL BD Philips-head FFC” to I/F BD screwdriver (Screw Torque: 11±1 kgf) 2. Assemble Rear Cover to Middle Frame 3. Lock 4 screws to fix Rear Cover 1. Insert the stand base blocks fully into the stand slot.
Page 17
Item Picture Operation Tool Notes Attach the stand assembly to the display 1. Fit the two tabs on the upper part of the stand to the groove on the back of the display. 2. Press the stand down till it snaps into place.