Message Waiting - Panasonic KX-TD816AL Installation Manual

3 Features
Feature References
Operation References
M
essage Waiting
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
None
Not applicable.
The system supports the ability to inform the called party of a
message waiting. The user, with a MESSAGE button, knows there
is a message if the LED of the MESSAGE button is lit red. If the
button is not provided nor assigned, the called party hears special
dial tone, when he / she goes off-hook. Pressing the lit MESSAGE
button also means to call back the called party or listen to the
messages which are stored in the mailbox of the Voice Processing
System.
• For the digital proprietary telephone which is provided with no
MESSAGE button, a flexible CO button can be assigned as the
MESSAGE button either by system or station programming.
• Cancelling the message can be performed from the extension setting it
or from the extension receiving it.
• The system supports a maximum of 128 simultaneous messages.
• Messages are always left on the original extension. It is not sent to a
Call Forwarding or Station Hunting destination.
• A single line telephone user will hear the ring tone as a notification, if
he / she receives a message. It is programmable to set the interval of a
ring tone by system programming.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Message waiting set / cancel / callback
[213] Message Waiting Ring Interval Time
[990] System Additional Information, Field (9)
Station Programming.......................................................User Manual,
Flexible Button Assignment – Message Waiting (MESSAGE) Button
Section 3, Features,
Dial Tone, Distinctive
DPT Features, SLT Features;

Message Waiting

Voice Mail Integration
Voice Mail Integration
Features
M
3-83