Table of Contents
Advertisement
...4 CONFIGURATION
4.12 Retransmission Output Page
Information.
•
Retransmission of process variable, set point, control output or position feedback input.
•
Programmable current output range.
•
Retransmission output can be used for cool output in heat/cool applications.
rEtrAN
OUtPUt
tYPE
PU.
rEt–HI
20.0
rEt–LO
4.0
SCALE
AdJUSt
4.13 Cool Output Page
This page is only present if
Second Output Type
COOL
OUtPUt
COOL–HI
20.0
COOL–LO
4.0
SCALE
AdJUSt
44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Page Header – Retransmisson Output.
Parameter Type
Select the parameter type to be re-transmitted,
(process variable input),
PFb
(position feedback).
Retransmission Maximum
Set the maximum retransmission value, between 0.0mA
and 20.0mA in 0.1mA increments.
Retransmission Minimum
Set the minimum retransmission value, between 0.0mA
and 20.0mA in 0.1mA increments.
Return to top of
or
Advance to
is selected at
HtCOOL
in the
Set Up Control Page
Page Header – Cool Output Page
Cool Output Maximum
Set the maximum value for the cool output, between
0.0mA and 20.0mA in 0.1mA increments.
Cool Output Minimum
Set the minimum value for the cool output, between 0.0mA
and 20.0mA in 0.1mA increments.
Return to top of
or
advance to
SPt
(set point),
Retransmission Output Page
Scale Adjustment Page.
and
Control Mode
– see Fig. 3.1 and Section 4.10.
Cool Output Page
Scale Adjustment Page
PV
OUt
(output) or
is selected at
C-ProP
.
Advertisement
Table of Contents
