Specifications; Nail Selection; Accessories; Standard Accessories - Hitachi NR 90AD Instruction And Safety Manual

English

SPECIFICATIONS

Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

Be sure to use only the genuine HITACHI nails for the NR90AD. The use of any other nails can result in tool
malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Paper collated strip nails
Clipped-head nails

ACCESSORIES

Accessories other than those shown below can lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

18-3/16" × 12-11/16" × 4-15/16"
(462 mm × 322 mm × 125 mm)
NR90AD
Min. Max.
.266"
(6.8 mm)
(7.7 mm)
.148"
.113"
(3.8 mm)
(2.9 mm)
1
NR90AD
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
7.0 lbs (3.2 kg)
50 – 74 nails (2 strips)
3
.088 ft /cycle at 100 psi
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Plastic-collated strip nails
Full-head nails
.303"
DANGER
1 Safety glasses ....................................................... 1
— 8 —
NR90AE
2
)
20-3/4" × 12-11/16" × 4-15/16"
(527 mm × 322 mm × 125 mm)
7.5 lbs (3.4 kg)
64 – 70 nails (2 strips)
2
)
NR90AE
Min. Max.
.286"
(7 mm) (7.6 mm)
.148"
.113"
(3.8 mm)
(2.9 mm)
.3"