Frame Battery; Removing The Frame Battery; Inserting The Frame Battery; Pannier Rack Battery - Bosch KETTLER KB064-ZAFD Series Translation Of The Original Operating Instructions

Hide thumbs Also See for KETTLER KB064-ZAFD Series:
Table of Contents

Advertisement

Notice
If you leave a key inserted when riding or
transporting the pedelec, it may break off or the
locking system may open accidentally.
 Remove the key from the battery lock
immediately after use.
 We recommend that you attach the key to a
key ring.
Switch off the battery and the drive system before
removing or inserting the battery.
6.9.1

Frame battery

Only applies to pedelecs with this equipment

6.9.1.1 Removing the frame battery

(1)
(2)
Figure 69: Removing and inserting the frame battery
 (1) Open the lock with the key.
 Tip the battery out of the top mount.
 (2) Pull the battery out of the mount.

6.9.1.2 Inserting the frame battery

 (3) Place the battery on the contacts in its
lower mount.
 (4) Remove the key from the lock.
 Tilt into the top mount as far as it will go.
 There is an audible clicking noise.
 Check inserted battery to ensure it is firmly in
place.
MY20K01-12_1.0_12.06.2019
6.9.2

Pannier rack battery

Only applies to pedelecs with this equipment

6.9.2.1 Removing the pannier rack battery

(1)
Figure 70: Removing (2) and inserting (3) the pannier rack
battery
 (1) Open the lock with the key.
 (2) Pull the pannier rack battery backwards and
out of its mount.
(3)
 Remove the key from the lock.

6.9.2.2 Inserting the pannier rack battery

 (3) Insert the pannier rack battery into its mount
(4)
with the contacts facing the front until it clicks
into place.
 Check inserted battery to ensure it is firmly in
place.
6.9.3

Integrated battery

Only applies to pedelecs with this equipment

6.9.3.1 Removing the integrated battery

(1)
Figure 71: Removing the integrated battery
Operation
(3)
(2)
(2)
(3)
(4)
75

Advertisement

Table of Contents
loading

Table of Contents