Simple Steps To Start - Samsung DVG45T6200 Series User Manual

Operations
NOTE
Do not take extremely tangled items from your washer and put them into the dryer. They can degrade the
drying efficiency of the dryer or cause the door to open. We recommend that you untangle the items before
putting them into the dryer. Also, do not put objects on the dryer, especially on the control panel.
CAUTION
Do not spray water directly onto the control panel. This may cause a system failure.
Icon description
Sensor Dry
Filter Check
Steam
Child Lock
Alarm Off

Simple steps to start

1. Press Power to turn the dryer on.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness, Temp., and Time) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle, and repeat steps 2-4 above if necessary.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
40 English
Untitled-18 40
This icon appears when the dryer operates the cycle which senses the
internal humidity to determine the drying time.
This icon displays after every load as a reminder to clean the lint
filter. Clean the lint filter before every cycle and make sure the filter is
properly inserted before starting a cycle.
This icon appears when the dryer is in steam process. The dryer sprays
water into the drum to deodorize clothes and reduce static electricity
and wrinkles.
This icon indicates that Child Lock is on. For more information on Child
Lock, see page 45.
This icon indicates that the alarm is off. For more information on Alarm
Off, see page 45.
2023-06-29( ) 3:23:51