Troubleshooting & Warranty - Black & Decker BCED15 Instruction Manual

TROUBLESHOOTING & WARRANTY
Troubleshoot your problem by using the chart below. If the dryer still does not work
properly, contact BLACK+DECKER customer service center or the nearest authorized
service center.
WARNING: Users must never troubleshoot internal components.
The control panel does not
illuminate
The dryer does not operate
The dryer drum does not rotate
The laundry is not completely
dry
• The dryer is not plugged in.
• The circuit breaker tripped or a fuse blew. Check for
blown circuit fuse or tripped main circuit breaker in
your house.
• The dryer is not plugged in.
• The circuit breaker tripped or a fuse blew. Check for
a blown circuit fuse or tripped main circuit breaker
in your house.
• The door is not closed.
• The dryer is not plugged in.
• The circuit breaker tripped or a fuse blew. Check for
a blown circuit fuse or tripped main circuit breaker
in your house.
• The door is not closed.
• Verify the Program and time settings used.
• Clean the filter.
• Reduce the laundry load in the dryer. Do not over-load
the dryer.
• Dry these items further
• Ensure the items are not knotted or twisted together.
• The dryer is not located in a properly ventilated area.
• Make sure your washer's spin cycle is extracting water
properly.
Page 19