Removing The Status-Light Board; Prerequisites; Procedure - Dell Alienware 17 R3 Service Manual

Removing the status-light
board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Follow the procedure from step 1 to step 9 in "Removing the

Procedure

1
Lift the latch and disconnect the status-light board cable from the status-
light board.
2
Remove the screws that secure the status-light board to the palm-rest
assembly.
40
Before working inside your
base panel.
computer. For more safety best
computer.
palm rest".