Playing The Image On A Tv - Sony Handycam HDR-TG1 Operating Manual

To adjust the sound volume of movies
When playing back a movie, touch
(OPTION) t tab t [VOLUME],
then adjust the volume with
z Tips
• On the VISUAL INDEX screen, i appears
with the image on the tab that was most recently
played back/recorded (B for the still image).
When you touch a movie marked with i, you
can play it back from the point it was previously
stopped.

Playing the image on a TV

Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 8).
Refer also to the instruction manuals
supplied with the device to be connected.
b Notes
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV. Some
settings may need to be adjusted on the TV
when playing back. Refer to the instruction
manual of your TV for details.
Operation flow
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.
r
Connect your camcorder and TV
referring to [TV CONNECT Guide].
Touch (HOME) t
t [TV CONNECT Guide].
r
Make the required output settings
on your camcorder.
/ .
Open the jack cover.
b Notes
• When the A/V connecting cable is used to
• Your camcorder and the Handycam Station are
(OTHERS)
A/V Remote
Connector
Open the jack cover.
Handycam
Station
output images, images are output with SD
(standard definition) image quality.
equipped with A/V Remote Connector or A/V
OUT jack. Connect the A/V connecting cable or
component A/V cable either to the Handycam
Station or to your camcorder. If you connect A/
V connecting cables or component A/V cable to
both the Handycam Station and your camcorder
at the same time, image disturbance may occur.
US
17