Advertisement
Cleaning
Wipe the power unit and whisk drive head with a damp cloth,
then dry. Ensure that the interlock area
debris.
Do not immerse the power unit, blade assemblies or whisk
drive head in water.
The bowl, lid, pusher and all attachment/tools apart from the
blade assemblies and whisk drive head are suitable for both
handwashing and dishwashing.
The blade assemblies should be brushed clean and rinsed
under running water.
Important – Plug and Fuse Information
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
The wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live
If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of
the same rating.
If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost
then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by
colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may
arise if an unwanted non-rewireable plug is inadvertently inserted into a socket outlet.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1
Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2
Wash the parts see 'care and cleaning'.
Key
Processor
Pusher
1
Feed tube
2
Lid
3
Bowl
4
Detachable drive shaft
5
Power unit
6
Speed/pulse control
7
Safety interlocks
8
Cord storage (at back)
9
Weighing Function
Kg/lb button
10
On/zero button
11
Display screen
12
Weighing tray
13
is clear of food
14A Plastic Blender
a
Blade assembly
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
14B Glass Blender
a
Blade assembly
b
Sealing ring
c
Goblet
d
Lid
e
Filler cap
C Standard Attachments
Knife blade
15
Dough tool
16
Dual whisk
17
4mm slicing/grating disc
18
2mm slicing/grating disc
19
Extra fine grating disc
20
5
(if supplied)
(if supplied)
Advertisement
