NEC LT380 Setup Manual page 30

6. Setting the LAN Setting of Personal Computer
5
Click [Use the following IP address:], and input [IP address]and[Subnet mask].
• If, for example, the [IP address] and [Subnet mask] of the projector are set as show in "Example of
settings for projector" on page 26, set the personal computer as shown below.
• Example of setting the IP address and subnet mask.
IP Address
Subnet Mask
6
Click [OK].
A property window for wireless network connections will be displayed.
7
Click the [Wireless Networks] tab.
8
Click [Use Windows to configure my wireless network settings], display the
check mark (
28
Projector ( page 26)
192.168.100.10
255.255.255.0
5
Click
-1
) and click [OK].
7
Click
8
Click
-1
Personal computer(Screen Below)
192.168.100.20
255.255.255.0
5
Input
-2
8
Click
-2