NEC Express5800/R120g-1E Maintenance Manual page 89

Chapter 2 Useful Features
For details about the options, see the table below.
Password Configuration
Administrator Password
User Password
Security Configuration
Password On Boot
Disable USB Ports
Remote Keyboard and Mouse
NVRAM Write Policy
Secure Boot Configuration
Trusted Computing
Option
Up to 20
alphanumeric
characters
Up to 20
alphanumeric
characters
[Disabled]
Enabled
[None]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear + Internal
Disabled
[Enabled]
[Unlock]
Lock
Express5800/R120g-1E Maintenance Guide
Parameter
−
When the <Enter> key is pressed, the
password entry screen to set administrative
right is displayed.
This password can be used to access all
SETUP menus. Password can be set only
when SETUP is started by administrative right.
If no password is set, SETUP starts with
administrative right.
When the <Enter> key is pressed, the
password entry screen to set user right is
displayed. With this password, access to
SETUP menus is limited. The user password
can be set when SETUP is started by
administrative right or user right.
−
Enable or disable the feature that requires a
password entry on boot. This option can be
selected When "Administrator Password" is
set.
Select a port to be disabled. Note that the USB
keyboard is enabled only while POST is
running.
Enable or disable the remote keyboard and
mouse supported by BMC.
Specify the operation policy to write to
the BIOS setting (NVRAM). If [Lock] is
specified, writing from OS to NVRAM is
restricted. This function can be selected
only when Secure Boot is set to
[Disabled].
This option can be selected only when
－
Boot Mode is set to [UEFI].
– This option is displayed only when the optional
TPM kit is installed and can be selected when
an administrator password has been set.
1. System BIOS
Description
−
–
[ ]: Factory setting
89