Connecting The Cables - JVC CV532PJ Instruction Manual

Connecting the cables

1
Turn off the computer.
2
Digital connection: Connect a digital signal cable between the monitor's DVI and
the computer's digital output. Make sure to tighten the screws on the connectors.
3
Analog connection: Connect the supplied analog signal cable between the
monitor's VGA and the computer's analog output. Make sure to tighten the screws
on the connectors.
The figure above shows an image of CV532PJ.
4
To use the touch panel,
RS-232C connection:
1) Connect a RS-232C cable between monitor's RS232 and the computer's COM
(RS232) port. Make sure to tighten the screws on the connectors.
2) The driver is downloadable from EETI website at
Carefully read the disclaimer provided on the website and download the driver
suited for your operation system.
Install the downloaded driver to your computer.
USB connection:
1) The driver is downloadable from EETI website at
Carefully read the disclaimer provided on the website and download the driver
suited for your operation system.
Install the downloaded driver to your computer.
2) Connect the supplied USB cable between the monitor's USB and the computer's
USB port.
3
2
https://www.eeti.com
https://www.eeti.com
- 19 -
To the computer's
analog port
To the computer's
digital port