Focus Frame Color
You can specify the color of the frame indicating the focusing area. If the
frame is difficult to see because of the subject, make it more visible by
changing its color.
MENU
(Camera Settings 1) [Focus Frame Color]
desired color.
White: Displays the frame indicating the focusing area in white.
Red: Displays the frame indicating the focusing area in red.
AF Illuminator
The AF illuminator supplies fill light to focus more easily on a subject
in dark surroundings. In the time between pressing the shutter button
halfway down and locking the focus, the AF illuminator lights up to allow
the camera to focus easily.
MENU
(Camera Settings 1) [
desired setting.
Auto: The AF illuminator lights up automatically in dark surroundings.
Off: Does not use the AF illuminator.
Note
• You cannot use [
– When the shooting mode is [Movie] or [S&Q Motion].
– When the focus mode is set to [Continuous AF].
– When [Focus Magnifier] is activated (page 69).
– When a Mount Adaptor is attached.
• If the Multi Interface Shoe is equipped with a flash with an AF illuminator
function, when the flash is turned on, the AF illuminator will turn on as well.
• The AF illuminator emits a very bright light. Although there is no health
hazard, do not look directly into the AF illuminator at close range.
AF Illuminator] in the following situations:
AF Illuminator]
GB
63