Storage Drive - Lenovo IdeaCentre AIO 3 Hardware Maintenance Manual

4. Install the optical drive bracket on the optical drive.
5. Install the optical drive and reconnect the cables.
6. Reinstall all the removed parts.
7. Reconnect the power cord and all disconnected cables to the computer.

Storage drive

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
Storage drive (with door)
For models with storage drive door, please refer below replacement procedure to remove the storage drive
and storage drive bracket.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
62
IdeaCentre AIO 3 Hardware Maintenance Manual