Sharp XG-MB70X Setup Manual page 28

Troubleshooting
\ Take the following steps for checking the network settings for the computer.
1. Open a command prompt (MS-DOS Prompt).
2. After launching the command prompt (MS-DOS Prompt), enter the command "ipconfig",
Note
• Communication may not be established even after carrying out the network settings for the computer. In
such cases, restart your computer.
C:\>ipconfig "Enter"
Note
• Usage examples of ipconfig
C:\>ipconfig /? displays how to use "ipconfig.exe".
C:\>ipconfig displays the set IP address, subnet mask and default gateway.
C:\>ipconfig /all displays all the setting information related to TCP/IP.
3. To return to the Windows screen, enter "exit" and press the "Enter" key.
-28
• In the case of Windows 98 or 98SE: click "START" ➔ "Programs" ➔ "MS-DOS Prompt" in
order.
• In the case of Windows Me: click "START" ➔ "Programs" ➔ "Accessories" ➔ "MS-DOS
Prompt" in order.
• In the case of Windows 2000: click "START" ➔ "Programs" ➔ "Accessories" ➔ "Command
Prompt" in order.
• In the case of Windows XP: click "START" ➔ "Programs" ➔ "Accessories" ➔ "Command
Prompt" in order.
and press the "Enter" key.