Blank Search; Time Counter - GE FPO CG400 User Manual

STOP PAUSE
REW PLAY

Blank Search

With the press of a button, the camcorder
advances through the tape for a blank
section. This feature saves time and tape
by locating the end of the last recorded
segment.
1. Place the camcorder in record-pause.
2. Press BLANK (located under top
control door).
BLANK flashes when searching a
recorded portion of the tape. It lights
for a blank portion.
The camcorder fast forwards or
rewinds the tape to the end of the
recorded portion, stops, and enters the
record-pause mode.
Tip: Blank search can also be used in the
playback (PLAY) mode. When the camcorder is
being used to play back a tape, just place the
camcorder in the stop mode and press BLANK.
All manuals and user guides at all-guides.com
BLANK
F.FWD EJECT
REC

Time Counter

The time counter appears in the LCD
window and shows the actual time
elapsed when recording a program or
playing back a segment of a prerecorded
tape. It helps you locate the end or
beginning of programs. Note the time
counter reading.
The time counter can only be reset to
0:00:00 in the following conditions:
• When the cassette compartment is
opened to eject or insert a cassette.
• When power is restored to the
camcorder after the battery or AC
adapter/charger has been disconnected.
BLANK
21