Table of Contents
Advertisement
Before any maintenance or cleaning is carried
out you must DISCONNECT the appliance from
the electricity supply.
Internal Cleaning
Clean the inside and accessories with warm water and
bicarbonate of soda (5 ml to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will damage
the surface and leave a strong odour.
External Cleaning
Wash the outer cabinet with warm soapy water.
Once or twice a year dust the condenser (black grille)
and the compressor at the back of the appliance with a
brush or vacuum cleaner, as an accumulation of dust will
affect the performance of the appliance and cause
excessive electricity consumption.
When the Appliance is not in Use
When the appliance is not in use for long periods, discon-
nect from the electricity supply, empty all foods and clean
the appliance, leaving the door open to prevent unpleas-
ant smells.
HOLIDAY mode
The HOLIDAY mode is suitable when the refrigerator
compartment is empty but there is foodstuff stored in the
freezer.
The HOLIDAY mode is activated by pressing the "D"
fridge temperature setting button several times. The dis-
play ("B") shows the letter "H".
To exit from the HOLIDAY mode press the "C" fridge tem-
perature setting button.
Important: If the fridge compartment is off, the door
must be closed in order that the freezer is working prop-
erly.
In this condition, the electronic control of the appliance
functions automatically and periodically circulate the air
to prevent unpleasant smells and humidity.
Maint
enance & Cleaning
Maint
enance & Cleaning
Defrosting
Defrosting is automatic in this model.
To Change the Light Bulb
Should the light fail to work you can change it as below:
Break the circuit of the appliance.
Press the rear hook (1) of the lampcover by a screwdriver
and at the same time pull and rotate the cover in the direc-
tion indicated by the arrow (2). So the bulb can be
replaced. (Bulb type: T25 Daylight 230-240 V, 25 W, E
14 thread)
After changing the bulb replace the cover, snap it in place
and apply voltage to the appliance.
11
Advertisement
Table of Contents
