Brother HL-L2400DW Quick Setup Manual

D02SVC001-00
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
AC Power Cord
1
Remove the packing materials and install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
Connect the power cord and
3
turn the machine on
Back
NOTE:
Before connecting the power cord, locate the Serial Number
label on the back or side of the machine. Record this number
for product registration and warranty support.
Quick Setup Guide
HL-L2400DW / HL-L2400DWE / HL-L2442DW / HL-L2445DW / HL-L2447DW /
HL-L2460DN / HL-L2865DW
UK
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Toner Cartridge and Drum Unit
Assembly
Quick Setup Guide
Front
NOTE:
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
• The screens and images in this Quick Setup Guide show the HL-L2447DW.
• Brother aims to reduce waste and save both raw materials and the energy
Product Safety Guide
• Save all packing materials and the box in case you must ship your machine.
1
2
Remove the orange part.
Do not exceed this mark.
Adjust the paper
guides.
4
Select your language (if needed)
1.
Press ▼ or ▲ to select [Initial Setup], and
then press OK.
2.
Press ▼ or ▲ to select [Local Language], and
then press OK.
3.
Press ▼ or ▲ to select your language, and then
press OK.
If you use a wired connection, you must purchase the correct cable for the
interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
required to produce them.
Read more about our environmental work at www.brotherearth.com.
1
Push firmly.